Actions

Backup and Restore (IP Stations)

From Zenitel Wiki

Revision as of 09:20, 24 April 2018 by Asle (talk | contribs) (Download Complete Configuration [Turbine only])
APS.png

From the web interface of the station it is possible to backup and restore the configuration data.

Log in to the station web interface, and select Station Administration > Backup and Restore:

The backup and Restore page


Download XML Configuration File

Will make a backup of current ipst_config.xml station configuration file.

Download Complete Configuration [Turbine only]

Will make a backup of current XML and ZAP station configuration, it will be saved as ipst_config.tar.gz.

Note icon ZAP configuration is currently only needed if VS-SDK for Pulse is being used in the system (and VS-SDK project type used in VS-IMT).


Upload Configuration File

Used to restore previously made backup of station configuration.

Ignored values from backup file

Some values from backup file will be ignored because station will force/generate a new value. Note that most of these settings are not configurable and have specific value on each station. The settings are:

  • MAC address
  • Hostname
  • Hardware type
  • Frontboard