AMC-IP Board - Replacement procedure
From Zenitel Wiki
This article gives a short overview when it comes to replacing an AMC-IP board.
Turn off power to the exchange using the main power switch located on the back of the exchange (top left corner).
Remove the faulty AMC-IP board from card position 25.
Remove the STIC �(STENTOFON Identity Card).
Insert the STIC in the new AMC-IP board.
Insert the new AMC-IP board in card �position 25.
Switch on power using the main switch �on the back.
Connect a computer to the exchange and open a web browser.
Log on to the exchange by typing in the IP address of the exchange in the address field.
Log in with the default credentials admin/alphaadmin
Navigate to System Management System Upgrade
Use the “Browse” option under Upload File to select the backup file for the relevant exchange.
Click Upload.
Two files will now be available:
System-config-backup-01.01.apkg
Exchange-db-backup-01.01.1pkg
Select the first file by clicking it.
Click the ”Install” button that becomes available.
After installation repeat for the second file.
Go to System Maintenance Backup, select “Restore DB”
The system now restores the AlphaPro Database.
Go to System Configuration Interfaces and press Save followed by Apply confirm with Yes.
Go to System Maintenance System Recovery Reboot and reboot the system
All configuration and settings are now restored