Configure 3rd party SIP devices (Edge)

Up to 10 3rd party SIP devices, such as SIP phones, SIP Speakers, Soft Phones etc., can be registered to an IC-EDGE System. Each SIP device requires that a SIP User account is defined on the Edge Controller.

Licences

For each SIP device used on the system, there must be a valid 3rd party SIP telephone license installed (Item no.100 9661 201).

To insert a license:

• Log on to the Edge Controller
• Select Edge Controller > Licensing
• In the New License field enter a valid license code, then Activate License

License for 4 SIP devices installed

From factory there is a 60-day free license period during which SIP devices can be used without the need of any license. When the free license period expires there must be a valid license installed, if not the SIP device will cease operating

Create a SIP Account

• Log on to the Pulse Server.
• Select Server Management > Server Configuration > Directory Settings.

Adding a SIP User account

• Under Third Party SIP Terminals enter the Directory Number, Name, and Profile for the SIP telephone.
• Click Add followed by Save

The Password field can be left blank. When a password is entered, the SIP phone must register using this password.

Configuration of the SIP device

You now have to log into the 3rd-party SIP telephone to configure the SIP account to register it with the Pulse Server station. The Directory Number and Password (SIP Account) created in the section above is used to register the 3rd-party station with the Pulse Server.