Actions

STATION EVENT BLOCK

From Zenitel Wiki

Revision as of 15:11, 3 October 2019 by Nikica (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
AI.png
STATION_EVENT_BLOCK 0x00B1 177 AMC 11.2.3.3
$SEB L101 U1 U1
Block M key from IP station
$SEB allow blocking of events from IP station (no analog stations) with $DP message.

Note 1: Block state will always be cleared after reset.
Note 2: Only station events kicked by DIP protocoll are blocked. Events from SimpleLinkLayer ($M, $MREL e.g) are not blocked during active blocking.
Note 3: $DIAL_DAK is actually (AMC 11.2.3.3) using the DIP function to simulate DAK pressing. Based on this $DIAL_DAK is blocked also at SimpleLinkLayer

1 NET_OBJ_REF
{ECL_USER}
Station to block
2 UINT1 Block event

1 = Block M-key from IP station
2 = Block Handset state from IP station
3 = Block Digit keys from IP station
4 = Block DAK keys from IP station
5 = Block C-key from IP station

3 UINT1 Block state

0 = Don't block event
1 = Block event

Response none



Back to AlphaNet message list