Actions

TFIE Indication LEDs

From Zenitel Wiki

Revision as of 12:42, 20 November 2020 by Roarl (talk | contribs) (Status LEDs on PCB)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

LEDs in Front Panel

TFIE Indications 1.PNG


  • Power (Green): Steady light when power is OK
  • Fault (Yellow): Flashing when the station is not registered/no connection to server
  • Call (Red): Steady light during a conversation/call


LEDs in Function Keys/DAK keys

When a TFIE station is used in AlphaCom mode, the LEDs in the DAK keys can be controlled from the Event Handler by using the IND command.


Status LEDs on PCB

TFIE Board Indications 1.png


Two LEDs (green and red) indicates if the station is registered.

  • Flashing green: Station is successfully registered to the server/controller
  • Flashing two times red + one time green or one red + two green: The station fails to register. Check the network, IP settings and account settings in the station and account settings, firewall, license and configuration in the server/controller


Ethernet Activity & Speed LEDs on PCB

TFIE Board Indications 2.png


Green LED:

  • Steady light: Ethernet connection OK
  • Flashing: Ethernet data traffic
  • No light: No Ethernet connection

Yellow LED:

  • Steady light: 100 Mbit Ethernet connection
  • No light: 10 Mbit Ethernet connection