Actions

Simplex conversation (Event Handler)

From Zenitel Wiki

Revision as of 10:14, 9 August 2007 by Hege (talk) (Programming)

General

This document describes how you can override the voice-operated duplex (VOX), and have a fixed speech direction. Two applications are described.<br\> The first one describes how calls from a master station can be programmed to have initial speech direction from the called station towards the master station.<br\> The second one describes how the whole exchange can be set in permanent simplex mode.<br\> Software requirement: AMC 08.20 or newer.

Initial Speech Direction B to A

When a master station calls a substation it is often required that the conversation should have a fixed speech direction from the substation towards the master station.<br\> By using the AlphaCom Event Handler, it is possible to force the M-key on the B-subscriber ON when the conversation starts, and release the M-key when the conversation cancels. This will force the initial speech direction to be from the substation towards the master station. By operating the M-key, the master can override the speech direction. (In AlphaCom, the last one who is pressing the M-key will get the speech direction). If the master makes a short M-key press the conversation will turn to voice switched duplex.

Programming

From AlphaPro main menu, press the Users & Stations button. Select the master station from the list box, and press the Events button. Create a new event by pressing the “+” button. Select:

Simplex Conversation Programming.jpg
  • Event type: 08 - Conversation Outgoing
  • When Change to: ON
  • When Related To: All
  • Action: PAUSE
$M L%2.DIR

<br\><br\><br\>

Create a second event for the same master station by pressing the “+” button again. Select:

Simplex Conversation Programming2.jpg
  • Event type: 08 - Conversation Outgoing
  • When Change to: OFF
  • When Related To: All
  • Action: $MREL L%2.DIR

If there are several stations to have initial speech direction set, you must create the same two events for each of the stations and set the new station as Event Owner.