Actions

Call and Relay operation by URL

From Zenitel Wiki

SIP Icon 300px.png

It is possible to initiate a call and to operate the relay on a station by an URL.

In the examples below 10.5.2.138 is the IP address of the Pulse/SIP station.

  • Call station number 10:
http://10.5.2.138/goform/zForm_webcall?message=Place+call&webcall=10
  • Cancel the call:
http://10.5.2.138/goform/zForm_webcall?message=Stop+call
  • Activate the relay:
http://10.5.2.138/goform/zForm_webcall?activate=Activate
  • Deactivate the relay:
http://10.5.2.138/goform/zForm_webcall?deactivate=Deactivate
  • Activate the relay with a timer (here 1 second):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=1
  • Activate the relay with a timer (here 20 seconds):
http://10.5.2.138/goform/zForm_webcall?activate=Activate&relaytimer=20