PA activation, multi-step

Feature:	ReCall and Pre stored PA activation, with multi step dialing of parameters. For the one-step dialling variant: see PA activation, one-step
Default directory number:	765
Feature number:	112
Parameter 1:	(Default 0) See PA activation, one-step#PA control bitmap
Parameter 2:	(Default 0) Priority of group call, 0 = use priority from group. 1 = Low 2 = Medium 3 = High 4 = Alarm (Volume override)
Parameter 3:	(Default 255) Gong type of group call, 0 = No gong 1 = Ding Dong 2 = Dong Ding 3 = Repeat gong 4 = Custom gong 255 = use gong type from group.
Description:	Dispatch message as a Group Call to global or local group. The dispatched message can either be a pre-Stored Voice Message or a message recorded live (Recall). Usage: 765 + <destination group> + <source-message> <destination group> can be Group call feature or Global Group Call feature <source-message> can be Voice Alarm Message or Stored Voice Message Feature <source-message> can also be replaced with M-pres to record the message for recall PA Examples: 765 + 87 + 8191 to start SVP message 8191 to group 87. 765 + 87 + M key to record the message to send to group 87 (recall). This feature can also be used for custom "Wav" gong in group calls: Setting param1 with bit0:1 for entering VP after SVP play and setting gong type = 0 (no gong).

Autoloaded directory numbers

Dirno	DisplayText	Feature	Parm1	Parm2	Parm3	Description
765	MsgToGroup	112	0	0	255	Remote setup of message or ReCall to group (same behaviour as AlarmToGroup (761) and ProgToGroup (75))

Back to feature list

Event reporting

Conversation_Outgoing_(Event_Type)

For Recall, Conversation-Outgoing is reported ON when entering recording-mode. For both Recall and Prestored PA, Conversation Outgoing is reported OFF when message playback to group is finished.

Related-to is the group number.

Voice Paging (Event Type)

Is reported during playback to group of the message, both for recall and prestored messages.