Difference between revisions of "ATLB in AlphaCom E7 - RCO's"
From Zenitel Wiki
| Line 1: | Line 1: | ||
| + | [[Image:ATLB-RCO.png|thumb|right|px300|atlb]] | ||
The [[RCO]] pinout towards the backplane is different on the [[ASLT]] and the [[ATLB]]. | The [[RCO]] pinout towards the backplane is different on the [[ASLT]] and the [[ATLB]]. | ||
Revision as of 14:37, 6 November 2008
The RCO pinout towards the backplane is different on the ASLT and the ATLB.
This is not a problem when using AlphaCom E20/E26, because the ATLB connection board and the RJ45 filter board is adjusted accordingly, so the RCO's comes out correctly.
But in the AlphaCom E7 there is a direct connection from board pos. 1 and 2 to the RCO 1-6 and 7-12, designed for the ASLT card pinout.
When using ATLB in AlphaCom E7 only four RCO's are available, and they come out on different pins than what you expect:
ATLB in board position 1:
- Logical RCO 1 (65/1) is not available
- Logical RCO 2 (65/2) is not available
- Logical RCO 3 (65/3) triggers physical RCO 2
- Logical RCO 4 (65/4) triggers physical RCO 3
- Logical RCO 5 (65/5) triggers physical RCO 4
- Logical RCO 6 (65/6) triggers physical RCO 5
ATLB in board position 2:
- Logical RCO 7 (65/7) is not available
- Logical RCO 8 (65/8) is not available
- Logical RCO 9 (65/9) triggers physical RCO 8
- Logical RCO 10 (65/10) triggers physical RCO 9
- Logical RCO 11 (65/11) triggers physical RCO 10
- Logical RCO 12 (65/12) triggers physical RCO 11