Difference between revisions of "Advanced Configuration Mode (Edge)"
From Zenitel Wiki
(→Enter Advanced Configuration Mode in v5 & v6) |
|||
| Line 3: | Line 3: | ||
This applies to for example: | This applies to for example: | ||
* Advanced Audio Settings | * Advanced Audio Settings | ||
| + | * Advanced Call Settings | ||
| + | * Extended Ringlist | ||
* SNMP | * SNMP | ||
* 802.1x Authentication | * 802.1x Authentication | ||
* Script configuration | * Script configuration | ||
* Firewall | * Firewall | ||
| − | + | ||
From version 7.1 the Advanced Mode is easily accessible in the top right corner: | From version 7.1 the Advanced Mode is easily accessible in the top right corner: | ||
Revision as of 15:37, 2 June 2023
When devices are used in an IC-EDGE System, some additional settings are available when entering the Advanced Configuration Mode.
This applies to for example:
- Advanced Audio Settings
- Advanced Call Settings
- Extended Ringlist
- SNMP
- 802.1x Authentication
- Script configuration
- Firewall
From version 7.1 the Advanced Mode is easily accessible in the top right corner:
For versions prior to 7.1 see below.
Advanced Configuration Mode in firmware version 5.x and 6.x
To enter the Advanced Configuration Mode go to Main -> Recovery -> Preferences
Type the offline password and tick off the Configuration check box and click Save.
Offline Password: 1851
To revert back to Basic Configuration mode, uncheck the same flag.