Difference between revisions of "Advancis WinGuard"
From Zenitel Wiki
(→General) |
(→AlphaPro) |
||
| Line 6: | Line 6: | ||
[[File:WinGuard SerialPort.PNG|thumb|400px|Serial Port settings for WinGuard]] | [[File:WinGuard SerialPort.PNG|thumb|400px|Serial Port settings for WinGuard]] | ||
===AlphaPro=== | ===AlphaPro=== | ||
| − | + | Configure the ACDP port to be used towards WinGuard. | |
From the AlphaPro main menu, select [[Exchange_%26_System_(AlphaPro)#Serial_Ports|Exchange & System > Serial Ports]], and select one of the available ACDP links and program as follows: | From the AlphaPro main menu, select [[Exchange_%26_System_(AlphaPro)#Serial_Ports|Exchange & System > Serial Ports]], and select one of the available ACDP links and program as follows: | ||
Revision as of 14:04, 26 March 2019
General
WinGuard is the PSIM software from Advancis. Integration between WinGuard and AlphaCom is via the ACDP protocol, using the link type Simple Link Layer. The following paragraphs give a short setup guide of the system, for more details please contact Advancis directly.
AlphaCom Setup
AlphaPro
Configure the ACDP port to be used towards WinGuard.
From the AlphaPro main menu, select Exchange & System > Serial Ports, and select one of the available ACDP links and program as follows:
- Port Type: TCP/IP server
- Link Type: Stentofon Simple Link Layer
- Broadcast: Enabled
- Port: Enter a TCP/IP port nr on which WinGuard and AlphaCom will communicate, default for WinGuard is 4001
- Keep Alive: Enabled
AlphaWeb
Make certain that the TCP/IP port as selected above is defined and enabled in the 'Filter-page' in AlphaWeb.