Actions

Difference between revisions of "AlphaPro"

From Zenitel Wiki

(Install driver for the USB Hardware Key)
(AlphaPro modes of operation)
Line 13: Line 13:
  
 
== AlphaPro modes of operation ==
 
== AlphaPro modes of operation ==
[[File:USB 1009291120.jpg|thumb|300px|The USB Hardware key - Item 1009291120]]
+
[[File:USB 1009291120.jpg|thumb|200px|The USB Hardware key - Item 1009291120]]
 
AlphaPro version 11.x operates in one out of two modes. An USB hardware dongle is used to differentiate between the different modes:
 
AlphaPro version 11.x operates in one out of two modes. An USB hardware dongle is used to differentiate between the different modes:
 
* '''AlphaPro M''': Runs without the USB hardware key. It gives access to all features, but only the first 36 subscribers (physical number 1-36) can be configured. [[AlphaNet]] cannot be configured in this mode.
 
* '''AlphaPro M''': Runs without the USB hardware key. It gives access to all features, but only the first 36 subscribers (physical number 1-36) can be configured. [[AlphaNet]] cannot be configured in this mode.
 
*  '''AlphaPro Professional''': When the hardware key is detected, AlphaPro will run in "Professional" mode. It gives access to all [[AlphaCom Feature List|features]]. This mode must be used to configure physical numbers above 36, or to configure [[AlphaNet]].
 
*  '''AlphaPro Professional''': When the hardware key is detected, AlphaPro will run in "Professional" mode. It gives access to all [[AlphaCom Feature List|features]]. This mode must be used to configure physical numbers above 36, or to configure [[AlphaNet]].
 
  
 
== Installation ==
 
== Installation ==

Revision as of 15:18, 15 June 2017

AlphaCom icon 300px.png
The AlphaPro configuration tool

AlphaPro is the programming tool for the AlphaCom exchange. AlphaPro gives the facility to program the features of the exchange off-line, and at a later stage upload this programming into the exchange. AlphaPro does not extend the features of the exchange, it fills in the appropriate tables.

Supported OS

AlphaPro version 11.6 supports the following Operating Systems:

  • Windows XP, Vista, 7, 8 and 10
  • Win 10 requires .NET 3.5 SP1 before AlphaPro installation

Windows Server is not supported.

AlphaPro modes of operation

The USB Hardware key - Item 1009291120

AlphaPro version 11.x operates in one out of two modes. An USB hardware dongle is used to differentiate between the different modes:

  • AlphaPro M: Runs without the USB hardware key. It gives access to all features, but only the first 36 subscribers (physical number 1-36) can be configured. AlphaNet cannot be configured in this mode.
  • AlphaPro Professional: When the hardware key is detected, AlphaPro will run in "Professional" mode. It gives access to all features. This mode must be used to configure physical numbers above 36, or to configure AlphaNet.

Installation

Prerequisites

Before installing AlphaPro, the computer must have the following software installed:

Installing AlphaPro

  1. Download the AlphaPro software from the download page
  2. Unzip the downloaded file, and run the setup.exe file
  3. Follow the instructions on the screen

Install driver for the USB Hardware Key

If this is the first time AlphaPro is installed on this computer, you need to also install a driver for the USB hardware key.

Open Windows File Explorer, and locate the folder where AlphaPro was installed. Here you will find the folder SentinelSystemDriver. Open the folder, and run the file Sentinel System Driver Installer 7.5.8.exe.

See also: Error message when starting AlphaPro after first time installation

Compatibility

AlphaPro Compatibility.png


  • Note 1: Databases made in the latest AlphaPro version may not function properly if used with older AlphaPro versions. It is recommended to always use the latest AlphaPro version.
  • Note 2: As from AlphaPro version 11.5 there is no support for serial communication, which is needed to configure AMC9. For AMC9 and mixed networks AlphaPro 11.2.x.x must be used.

Related articles