Difference between revisions of "Automatic M-key In Group Call"
From Zenitel Wiki
(→Description) |
(→Configuration from AlphaPro Event Handler) |
||
| Line 10: | Line 10: | ||
2 = Will turn it on only for SIP stations initiating group call. <br\> | 2 = Will turn it on only for SIP stations initiating group call. <br\> | ||
| − | == Configuration from | + | == Configuration from Event Handler == |
[[Image:Automatic M-key for Group Calls.jpg|thumb|right|300px|Enable automatic M-key for group 3 (86) when called from SIP]] | [[Image:Automatic M-key for Group Calls.jpg|thumb|right|300px|Enable automatic M-key for group 3 (86) when called from SIP]] | ||
(Use [[System_Status_%28Event_Type%29 | System Status Event]] related to device 65 ) | (Use [[System_Status_%28Event_Type%29 | System Status Event]] related to device 65 ) | ||
Revision as of 11:30, 9 May 2008
Description
A Group Call can be configured to start audio without the need of pressing the M-key. The parameter to change is not available from AlphaPro, so it has to be changed in the AMC memory (nvram) directly, either via the TST console or by using the Event Handler.
TST>>nvram - ex_profile.group[1].flags = 1 (0x01)
Flags:<br\> 0 = Regular group call behaviour. <br\> 1 = Will turn the Automatic M-key on for all stations initiating group call. <br\> 2 = Will turn it on only for SIP stations initiating group call. <br\>
Configuration from Event Handler
(Use System Status Event related to device 65 )
$SNV Q(flag) W1 W11 W(group number) W6
flag = 0 (off) 1 or 2 as described above.<br\>
group number = 1 - 100
Automatic M-key is meant to be used on SIP or special non display stations. Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
Back to Feature description