Difference between revisions of "Automatic M-key In Group Call"
From Zenitel Wiki
(→Configuration from Event Handler) |
(→Configuration from Event Handler) |
||
| Line 20: | Line 20: | ||
group number = 1 - 100 | group number = 1 - 100 | ||
| − | + | ==Additional information == | |
| − | + | *Automatic M-key is meant to be used on SIP or special non display stations. | |
| + | *Automatic M-key will on AlphaCom display stations show "wait" in second line of the display. | ||
| + | * Require AMC software 10.30 or later | ||
Back to [[Feature description]] | Back to [[Feature description]] | ||
[[Category: AlphaCom features]] | [[Category: AlphaCom features]] | ||
Revision as of 11:34, 9 May 2008
Description
A Group Call can be configured to start audio without the need of pressing the M-key. The parameter to change is not available from AlphaPro, so it has to be changed in the AMC memory (nvram) directly, either via the TST console or by using the Event Handler.
TST>>nvram - ex_profile.group[1].flags = 1 (0x01)
Flags:<br\> 0 = Regular group call behaviour. <br\> 1 = Will turn the Automatic M-key on for all stations initiating group call. <br\> 2 = Will turn it on only for SIP stations initiating group call. <br\>
Configuration from Event Handler
Use System Status Event related to device 65, and the following action string:
$SNV Q(flag) W1 W11 W(group number) W6
flag = 0 (off), 1 (Always automatic M) or 2 (Automativ M from SIP).<br\>
group number = 1 - 100
Additional information
- Automatic M-key is meant to be used on SIP or special non display stations.
- Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
- Require AMC software 10.30 or later
Back to Feature description