Actions

Automatic M-key In Group Call

From Zenitel Wiki

Revision as of 15:01, 20 May 2022 by Asle (talk | contribs)
AI.png

A Group Call can be configured to start audio without the need of pressing the M-key. This is configurable for each individual group. The setting is available from AlphaPro.


From the TST console

TST>>nvram - ex_profile.group[1].flags = 1 (0x01)

Flags:
0 = Regular group call behaviour, e.g. M-key must be pressed to open the audio path
1 = Automatic M-key for all stations initiating the group call
2 = Automatic M-key when SIP stations are initiating the group call

Configuration from Event Handler

Enable automatic M-key for group 3 (86) when called from SIP

The System Status Event related to device 65 will be triggered when the AlphaCom starts up. Use the following action string: 

$SNV Q(flag) W1 W11 W(group number) W6


flag = 0, 1 or 2 as described above
group number = 1 - 100

The programming will take effect after a reset of the exchange.

Additional information

  • Automatic M-key is meant to be used on SIP or special non display stations.
  • Automatic M-key will on AlphaCom display stations show "wait" in second line of the display.
  • Require AMC software 10.30 or later

Back to Feature description

Retrieved from "https://wiki.zenitel.com/w/index.php?title=Automatic_M-key_In_Group_Call&oldid=228407"