Difference between revisions of "ECPIR-3P"
From Zenitel Wiki
(→Software Upgrade) |
(→Configuration) |
||
| Line 5: | Line 5: | ||
== Configuration == | == Configuration == | ||
| + | The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure. | ||
| + | * [[Turbine Configuration - AlphaCom mode|AlphaCom mode]] | ||
| + | * [[Turbine Configuration - SIP mode|SIP mode]] | ||
| + | * [[IP Station Configuration - Pulse mode|Pulse mode]] | ||
| + | |||
The ECPIR-3P station is currently fully supported in '''AlphaCom mode''' only. | The ECPIR-3P station is currently fully supported in '''AlphaCom mode''' only. | ||
* [[Turbine Configuration - AlphaCom mode|Basic configuration]] | * [[Turbine Configuration - AlphaCom mode|Basic configuration]] | ||
Revision as of 13:54, 16 June 2017
Contents
Getting started
Configuration
The station can operate in three different modes, depending on what kind of server the station should register to. Choose one of the links below according to what mode you need to configure.
The ECPIR-3P station is currently fully supported in AlphaCom mode only.
Advanced Network Settings
Restore Factory Defaults and Software Upgrade
- Restore Factory Defaults
- Upgrade via the station web interface
- Upgrade using the IMT tool
- Automatic Software Upgrade (SIP mode only)
Connectors, Indicators and Dimensions
Accessories
| 100px | 
|
|
|
|
| EBMDR-8 | MB-30G | EMMAR-1H | EMBR-1 | EMBR-2 |
