Difference between revisions of "Event During Connection"
From Zenitel Wiki
| Line 16: | Line 16: | ||
*Related to: The other station in the conversation | *Related to: The other station in the conversation | ||
*Subevent: Same as "Parameter 1" of the "Event During Connection" feature configured in the Directory Table | *Subevent: Same as "Parameter 1" of the "Event During Connection" feature configured in the Directory Table | ||
| + | |||
| + | Examples: | ||
| + | *Directory number 1, feature 107/1: When digit 1 is pressed during conversation, DTMF digit 1 is transmitted (default for 3,5 seconds) | ||
| + | *Directory number 1, feature 107/5: When digit 1 is pressed during conversation, DTMF digit 5 is transmitted (default for 3,5 seconds) | ||
| + | *Directory number 1, feature 107/255: Dial digit 1 during conversation to enter "DTMF transmission mode". Audio from the conversation is now switched off. Successive digits will be sent as DTMF digits. E.g. 1 + 345 will send DTMF 3, then 4, then 5. The DTMF tone is transmitted as long as the digit is pressed. Press C-key to leave the "DTMF transmission mode" and return back to conversation mode. | ||
| + | |||
| + | Note that the conversation audio is switched off during DTMF tone transmission. | ||
|} | |} | ||
[[AlphaCom Feature List|Back to feature list]] | [[AlphaCom Feature List|Back to feature list]] | ||
Revision as of 22:53, 14 February 2008
| Feature: | Event During Connection |
| Default directory number: | None |
| Feature number: | 108 |
| Parameter 1: | 0-255 = Subevent for Event Trigger Feature 15 |
| Description: | This feature is only available during connection. When the feature is activated an Event Trigger Feature 15 is sent to the Event Handler Event handler relations:
Examples:
Note that the conversation audio is switched off during DTMF tone transmission. |