Feature reminder

A station has feature reminder activated when the station LED is flashing and a bleep tone is heard in the speaker every minute. "Feature reminder" is automatically activated when the station:

• has Call Forwarding activated
• is in absence mode
• has mail message
• has calls in queue (Call Request with priority below 120)

Additional information:

• The "feature reminder" status is cancelled from the station by dialling the station reset code 70.
  
• The "feature reminder" status can be remotely cancelled by dialling "station number + 51 + 0" (require AMC 10.50 or later).
• The "feature reminder" indication is by default enabled for all users, but can be enabled/disabled per station by the flag "Feature Reminder Wanted" in Users & Stations > User Preferences
  
• The time between the bleep tone can be modified from the nvram editor in the TST console:

TST>>nvram - ex_profile.timeouts.th_bleep_pause = 600 (0x0258)

See also Urgent feature reminder

Feature Reminder when Station type is set to "CRM"

The original CRM station had an built in buzzer, thus mail notification is not done through the loudspeaker when the station type is set as "CRM" in AlphaPro. <BR\> With the introduction of DualDisplay and IP master with 4 line display, CRM station type can be selected for CRM functionality, but then no buzzer is available. <br\>

A station flag is introduced to allow normal mail notification even when station type CRM is selected.

This flag can be set by this command:

$SNV Q%op(%gnv(5,8,%1.phy,17),|,8192) W5 W8 W%1.phy W17

This flag was introduced in AMC software 10.56.