Difference between revisions of "Group Call - PTT function"
From Zenitel Wiki
Line 2: | Line 2: | ||
This article describes how to configure a DAK key on a station to activate a Group Call when the key is pressed, and cancel the group call when the DAK key is released. | This article describes how to configure a DAK key on a station to activate a Group Call when the key is pressed, and cancel the group call when the DAK key is released. | ||
− | Configure the group to use "Automatic M-key" | + | ==Configure the group to use "Automatic M-key"== |
In AlphaPro, select the Group Call, and enable "Automatic M-key". When enabled, there is no need to press the M-key to open the microphone during the group call: | In AlphaPro, select the Group Call, and enable "Automatic M-key". When enabled, there is no need to press the M-key to open the microphone during the group call: | ||
Line 8: | Line 8: | ||
[[File:GroupAutoM.png|thumb|500px|Enable "Automatic M-key" for group call 85|none]] | [[File:GroupAutoM.png|thumb|500px|Enable "Automatic M-key" for group call 85|none]] | ||
− | In the Event Handler, the event 30 (Station DAK | + | == DAK event == |
+ | In the [[Event Handler]], the event 30 (Station Iput or DAK key) is triggered when a DAK Key is pressed. | ||
The following event will activate group call 85 when the DAK key number 3 (= Subevent 3) is pressed, and cancel when the key is released. | The following event will activate group call 85 when the DAK key number 3 (= Subevent 3) is pressed, and cancel when the key is released. | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|'''Exchange and System''' -> '''Events''']], press '''Insert''' and create the following event (the action strings can be copy/paste from here into AlphaPro): | In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|'''Exchange and System''' -> '''Events''']], press '''Insert''' and create the following event (the action strings can be copy/paste from here into AlphaPro): |
Revision as of 15:43, 31 October 2017
This article describes how to configure a DAK key on a station to activate a Group Call when the key is pressed, and cancel the group call when the DAK key is released.
Configure the group to use "Automatic M-key"
In AlphaPro, select the Group Call, and enable "Automatic M-key". When enabled, there is no need to press the M-key to open the microphone during the group call:
DAK event
In the Event Handler, the event 30 (Station Iput or DAK key) is triggered when a DAK Key is pressed.
The following event will activate group call 85 when the DAK key number 3 (= Subevent 3) is pressed, and cancel when the key is released.
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event (the action strings can be copy/paste from here into AlphaPro):
Action commands:
IF %chg(1,0) $DD L%1.dir L85 stop ENDIF $C L%1.dir
Note that in the DAK table of station 164 the DAK key 3 must be blank.