Difference between revisions of "HD audio for background music distribution"
From Zenitel Wiki
(→Configuration of AlphaCom server) |
(→Configuration of AlphaCom server) |
||
| Line 20: | Line 20: | ||
== Configuration == | == Configuration == | ||
=== Configuration of AlphaCom server === | === Configuration of AlphaCom server === | ||
| − | + | In AlphaPro '''Users & Stations''', create a new directory number for the Line In: | |
[[File:ENA Audio In-AlphaPro.png|thumb|left|500px|Create a Directory Number for "Audio In"]] | [[File:ENA Audio In-AlphaPro.png|thumb|left|500px|Create a Directory Number for "Audio In"]] | ||
<br style="clear:both;" /> | <br style="clear:both;" /> | ||
| + | |||
| + | |||
From AlphaPro '''Directory & Features''', press '''Insert''' and create a new directory number: | From AlphaPro '''Directory & Features''', press '''Insert''' and create a new directory number: | ||
* Feature 118 - [[Program_Source|Program Source]] | * Feature 118 - [[Program_Source|Program Source]] | ||
Revision as of 16:11, 12 April 2018
Background music is distributed by using the Audio Program feature of AlphaCom. By default this feature is using the HD Voice codec G.722.
In installations where an even better audio quality for background music distribution is required, it is possible to use the HD Audio codec PCM L16/48kHz.
The following devices support audio input feed using the PCM L16/48kHz codec:
- ENA Amplifier
- TKIE-2 kit
The following devices can play audio in PCM L16/48kHz format:
- ENA2200, ENA2400-AC and ENA2400-DC amplifiers
Contents
Requirements
- Software: HD Audio is supported from AMC 12.5.3.1 or later.
- License: When using HD Audio for background music distribution, a High bandwidth audio license is reqired. It is sufficient with one HD Audio license per AlphaCom server.
- To install the license, log on to the web interface of the AlphaCom server, and select System Configuration > Licensing.
Configuration
Configuration of AlphaCom server
In AlphaPro Users & Stations, create a new directory number for the Line In:
From AlphaPro Directory & Features, press Insert and create a new directory number:
- Feature 118 - Program Source
- ID (Parameter 1) = Program channel 1-70
- Parameter 2 = 0
- Parameter 3 = 10 (PCM L16/48kHz codec)
The example below shows how to add directory number 6801 as the code to become the source of Audio Program #1. Note that the Directory number to listen to program #1 is 801.
Add an event 13, when change to OFF with action: $DD L%1.dir L6801. This event will be activated when the ENA Amplifier (or TKIE-2) comes up after reset of the device or the AlphaCom server.
Configuration of ENA Amplifier
Configuration of TKIE-2
TKIE must be set to feed audio from line in:
