Difference between revisions of "INCA 2.11 - Release Notes"
From Zenitel Wiki
(Created page with "== Release info == This document provides the release notes for VSF-INCA 2.11 with incremental bug fix releases. The changes are described from INCA 2.9.3.1. '''Name:''' VSF-...") |
(→New Features - INCA Intercom) |
||
| Line 14: | Line 14: | ||
= VSF-INCA 02.11.3.0 = | = VSF-INCA 02.11.3.0 = | ||
==New Features - INCA Intercom == | ==New Features - INCA Intercom == | ||
| + | === PHIX-81 Dual display DAK text is updated without need for reboot === | ||
| + | |||
| + | === PHIX-120 New default view for Edge and SIP mode === | ||
| + | The default view on the web interface for Edge is now more similar to the Edge controller. For devices in SIP mode, the web interface has also been simplified some. <br/> | ||
| + | User is able to switch to old, advanced, view on Recovery tab under Main settings. | ||
| + | |||
=== PHIX-142 IP Telephony Service now available for Edge === | === PHIX-142 IP Telephony Service now available for Edge === | ||
The IP Telephony Service allow calls from an IC-EDGE site to public telephones without need to use additional hardware such as MP-114 gateways. IC-Edge connects to a SIP trunk provider which has access to telephony calls. <br/> | The IP Telephony Service allow calls from an IC-EDGE site to public telephones without need to use additional hardware such as MP-114 gateways. IC-Edge connects to a SIP trunk provider which has access to telephony calls. <br/> | ||
| Line 19: | Line 25: | ||
* Max number of concurrent calls: 2 | * Max number of concurrent calls: 2 | ||
| − | === | + | === MTN-1301 Busy Override would fail when remote party is busy === |
| − | + | Busy override should now be possible if remote part has dialed digits, is offhook or in emergency group call. | |
| − | |||
=== MTN-1978 It is now possible to call multiple cell phones in sequential ringlists === | === MTN-1978 It is now possible to call multiple cell phones in sequential ringlists === | ||
This is possible by adding pause parameter in seconds on ringlist entry. Eg. 91523524:pause=5. | This is possible by adding pause parameter in seconds on ringlist entry. Eg. 91523524:pause=5. | ||
| − | + | === MTN-2454 Send Text option is possible to select other receiver === | |
| − | + | Optimized gui for better intuitivity. | |
| − | === MTN- | ||
| − | |||
=== MTN-2530 Removed C-key enabling of Private/Open mode in SIP/Edge mode === | === MTN-2530 Removed C-key enabling of Private/Open mode in SIP/Edge mode === | ||
C-key enabling of private/open mode has been removed. IP Flush master and IP Desktop master can do this in the menu. | C-key enabling of private/open mode has been removed. IP Flush master and IP Desktop master can do this in the menu. | ||
| − | === MTN- | + | === MTN-2657 Firewall range for RTP is increased === |
| − | + | Firewall for RTP is increased to UDP ports 61000-62000 to support new AlphaCom audio handling | |
| − | === MTN- | + | === MTN-2752 Relay did not work === |
| − | + | This has been fixed. | |
==Known Issues == | ==Known Issues == | ||
Revision as of 13:56, 18 February 2020
Contents
- 1 Release info
- 2 VSF-INCA 02.11.3.0
- 2.1 New Features - INCA Intercom
- 2.1.1 PHIX-81 Dual display DAK text is updated without need for reboot
- 2.1.2 PHIX-120 New default view for Edge and SIP mode
- 2.1.3 PHIX-142 IP Telephony Service now available for Edge
- 2.1.4 MTN-1301 Busy Override would fail when remote party is busy
- 2.1.5 MTN-1978 It is now possible to call multiple cell phones in sequential ringlists
- 2.1.6 MTN-2454 Send Text option is possible to select other receiver
- 2.1.7 MTN-2530 Removed C-key enabling of Private/Open mode in SIP/Edge mode
- 2.1.8 MTN-2657 Firewall range for RTP is increased
- 2.1.9 MTN-2752 Relay did not work
- 2.2 Known Issues
- 2.2.1 MTN-2360 Client side forwarding does not work in SIP mode
- 2.2.2 MTN-2357 IP Desktop Video Station can't receive video from 4.11.3.0 TCIV if HTTP basic authentication for HTTP MJPEG is enabled
- 2.2.3 MTN-1052 PTT does not work between Gateway and INCA station
- 2.2.4 MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C
- 2.2.5 MTN-817 IP Video Desktop does not indicate private/open mode
- 2.2.6 MTN-482 Transfer function doesn't work with Cisco CCM
- 2.1 New Features - INCA Intercom
Release info
This document provides the release notes for VSF-INCA 2.11 with incremental bug fix releases. The changes are described from INCA 2.9.3.1.
Name: VSF-INCA
Description: VSF-INCA is a firmware archive for all INCA Family Intercom stations including devices:
IP Desktop Master Station, IP Flush Master Station, IP Substation, IP Dual Display, IP-ARIO and IP Video Desktop Station.
Version:
- 02.11.3.0
Date: 14.02.2019
Status: General Availability
|
Release notes for Video module component in IP Desktop Station with Video Display (1408001635) can be found in separate document on Zenitel Wiki page IP Desktop with Video Display - Release Notes |
VSF-INCA 02.11.3.0
New Features - INCA Intercom
PHIX-81 Dual display DAK text is updated without need for reboot
PHIX-120 New default view for Edge and SIP mode
The default view on the web interface for Edge is now more similar to the Edge controller. For devices in SIP mode, the web interface has also been simplified some.
User is able to switch to old, advanced, view on Recovery tab under Main settings.
PHIX-142 IP Telephony Service now available for Edge
The IP Telephony Service allow calls from an IC-EDGE site to public telephones without need to use additional hardware such as MP-114 gateways. IC-Edge connects to a SIP trunk provider which has access to telephony calls.
Limitations:
- Max number of concurrent calls: 2
MTN-1301 Busy Override would fail when remote party is busy
Busy override should now be possible if remote part has dialed digits, is offhook or in emergency group call.
MTN-1978 It is now possible to call multiple cell phones in sequential ringlists
This is possible by adding pause parameter in seconds on ringlist entry. Eg. 91523524:pause=5.
MTN-2454 Send Text option is possible to select other receiver
Optimized gui for better intuitivity.
MTN-2530 Removed C-key enabling of Private/Open mode in SIP/Edge mode
C-key enabling of private/open mode has been removed. IP Flush master and IP Desktop master can do this in the menu.
MTN-2657 Firewall range for RTP is increased
Firewall for RTP is increased to UDP ports 61000-62000 to support new AlphaCom audio handling
MTN-2752 Relay did not work
This has been fixed.
Known Issues
MTN-2360 Client side forwarding does not work in SIP mode
Client side forwarding, which can be configured as a DAK action or activated from INCA display menu, does not work in SIP mode. Workaround is to use SIP server side forwarding.
MTN-2357 IP Desktop Video Station can't receive video from 4.11.3.0 TCIV if HTTP basic authentication for HTTP MJPEG is enabled
IP Desktop Video Station can't receive video from 4.11.3.0 TCIV if HTTP basic authentication is enabled on TCIV station. This does not affect TCIV stations running on 4.9.3.3 or earlier.
Workaround is to disable HTTP basic authentication for HTTP MJPEG.
MTN-1052 PTT does not work between Gateway and INCA station
Make a call between Inca and Gateway. Pressing * and # on mobile phone configured on Gateway does not effect conversation direction on INCA.
If call is made between Turbine and Gateway, PTT works as expected.
MTN-883 IP Flush (Pulse) shows error 484 when dialing and pressing C
When start to dial a number and then hit C, error message 484 is shown on the display. The fault appears in Pulse server mode and Pulse client mode.
MTN-817 IP Video Desktop does not indicate private/open mode
There is no user feedback when changing between open/private mode with C-key, and no indication of what mode the station is currently in.
MTN-482 Transfer function doesn't work with Cisco CCM
When the station is used in SIP mode, connected to a Cisco Call manager (version: 9.1.1.21020-1) the permanent call transfer function does not work. When calling the station, we hear a Cisco Call manager message saying that this number is unreachable. In the Cisco station settings the transfer is not activated.