A100G802D0.02.01.2.2

NOTE: This release is only for the IP-dualdisplay

System upgrade file:
Image: A100G802D0.02_01_2_2.bin
Checksum: 21AC3FC8

DIP Functional changes / Enhancement

NOTE: This release is only for the IP-Master, IP-Desktop and IP-substations, cannot be used for IP-ARIO or IP-dualdisplay

System upgrade file:
Image: A100G80200.02_01_3_3.bin
Checksum: 9CF2A744

NOTE: This release is only for the IP-Master, IP-Desktop and IP-substations, cannot be used for IP-ARIO or IP-dualdisplay

System upgrade file:
Image: A100G80200.02_01_3_2.bin
Checksum: DF0889BE

Added check on image name. Normal stations should not accept dualdisplay images and vice versa. Dualdisplay images got a D in the image name (A100G802D0.version).

NOTE: This release is only for the IP-Master, IP-Desktop and IP-substations, cannot be used for IP-ARIO or IP-dualdisplay

Added support for having one firmware for Pulse, SIP and AlphaCom mode
Factory default station mode is Pulse.
New web interface.
Removed SIP license requirement.
It is possible to change station mode in the display (aswell as in the station web).

Added support for IP Heavy Duty, Desktop and Master as SIP stations.
The station now retransmits 200 OK and ACK on INVITE messages. If these messages were lost the conversation was not set up.
Fixed an issue where calls were not released when DNS failed.
Fixed an issue where To tag was not sent in ACK. This could result in conversations not being set up.
There is now a 1 second delay when going to the next entry in the ringlist to reduce load on the server.
Changed the web interface for ringlist.
Added NTP client and configuration.
Added logging to web interface. This feature will be expanded with more logging messages in the future releases. Note that the logging is to memory only and will be lost on restart.
If the station finds TFTP remote provisiong the station will be a SIP station after applying the configuration
The station will now answer OPTIONS messages outside of a dialog.

Added Pulse server mode - In Pulse server mode the station can act as a server for other stations and configure Pulse stations.
Added Pulse mode - In Pulse mode the station can register to a Pulse server.
Master stations, Substations, IP Heavy Duty and IP Desktop are supported as Pulse stations

(Pulse server bug) Sending Re-invite to remote station from a station that is not allowed to call to remote station (due to profile configuration) does not work
(Pulse server bug) Gateways are not fully supported
(SIP) 183 Session Progress is not fully supported

NOTE: This release is only for the IP-dualdisplay

This image is the same as A100G80200.02.01.3.2 except that it supports dualdisplay hardware and software functionality.
Dualdisplay supports 2 displays, private button, and 10 DAKs.