Difference between revisions of "IND - Indicator control for CRMIV LEDs, buzzer etc."
From Zenitel Wiki
| Line 4: | Line 4: | ||
| − | '''phys.no''': 1-552 = The physical connection for the CRM IV station you are programming | + | '''phys.no''': 1-552 = The physical connection for the CRM IV station you are programming <br> |
| − | '''key.no''': 1-100 = Single-touch keys See drawing on the next page for details | + | '''key.no''': 1-100 = Single-touch keys See drawing on the next page for details<br> |
1023 = Buzzer | 1023 = Buzzer | ||
1024 = Display | 1024 = Display | ||
| − | '''led.no''': Single-touch keys Buzzer Display | + | '''led.no''': Single-touch keys Buzzer Display<br> |
1 = Red LED 1 = Internal buzzer 1 = Backlight | 1 = Red LED 1 = Internal buzzer 1 = Backlight | ||
2 = Green LED 2 = External buzzer (relay) | 2 = Green LED 2 = External buzzer (relay) | ||
Revision as of 02:02, 10 November 2007
Syntax
IND <phys.no> <key.no> <led.no/buzzer> <ind-type> [ON/OFF]
phys.no: 1-552 = The physical connection for the CRM IV station you are programming
key.no: 1-100 = Single-touch keys See drawing on the next page for details
1023 = Buzzer
1024 = Display
led.no: Single-touch keys Buzzer Display
1 = Red LED 1 = Internal buzzer 1 = Backlight
2 = Green LED 2 = External buzzer (relay)
Indtype LEDs and display: Buzzers
1 = continuous (low priority) 1 = 1 bleep per 8 seconds (low priority)
2 = slow flash (medium priority) 2 = 1 bleep per 2 seconds (medium priority)
3 = fast flash (high priority) 3 = 4 bleeps per second (high priority)
4 = continuous (alarm priority)
See “multiple LED functions” below.
[state] OFF or ON (capital letters)
The brackets [ ] indicate that this command is optional.
If nothing is entered in this field, the indication is switched on/off along with the event.
By entering OFF, for example, you can set an indication to turn off when the event
turns on.
Example
IND 2 23 2 3 ON – Station 2, key 23, turn green led, fast flashing, ON