IND - Indicator control for CRMIV LEDs, buzzer etc.

The IND (INDication) action is used in the Event Handler for sending commands to a station. The commands are sent as display data. The following stations are currently using the IND command:

• CRM IV: Control the LED's in the DAK keys, the internal buzzer or relay, and the backlight of the display
• DualDisplay station: Control the video-state of the DAK-display
• Priscom station: Control the outputs used for lamps, cell light, call LED and spare output

Command syntax

IND <station phys.no> <output> <LED no/buzzer> <Ind-type> [state]

Between the command parameters, there must always be a space.

Parameter description:

Parameter	CRM IV	DualDisplay	PrisCom
station phys.no	1 - 552 = The physical number of the station
output	1-100 = The key number of the DAK-key 1023 = Buzzer 1024 = Display backlight	1-100 = The DAK-line	1 - 4 = Lamp outputs 5 - 6 = Spare outputs 7 = Cell light 8 = Call LED
LED no/buzzer	DAK-key: 1 = Red LED 2 = Green LED Buzzer: 1 = Internal buzzer 2 = External buzzer (relay) Display backlight: 1 = Backlight	Always "1"	Always "1"
Ind-type	DAK LED's: 1 = continuous (low priority) 2 = slow flash (medium priority) 3 = fast flash (high priority) Buzzers: 1 = 1 bleep per 8 seconds (low priority) 2 = 1 bleep per 2 seconds (medium priority) 3 = 4 bleeps per second (high priority) 4 = continuous (alarm priority) Display backlight: 1 = continuous	Video-state of the DAK-display: 0 = Normal 1 = Inverse 2 = Slow flash 3 = Fast flash	Output state: 1 = continuous 2 = slow flash 3 = fast flash
[state]	ON or OFF (capital letters)

Station/Parameter	phys.no	output	LED no/buzzer	IND-type	[state]
CRM V	Physical number 1 - 552	1-100 = DAK-key number 1023 = Buzzer 1024 = Display backlight	DAK-key: 1 = Red LED 2 = Green LED Buzzer: 1 = Internal buzzer 2 = External buzzer (relay) Display backlight: 1 = Backlight	DAK LED's: 1 = continuous (low priority) 2 = slow flash (medium priority) 3 = fast flash (high priority) Buzzers: 1 = 1 bleep per 8 seconds (low priority) 2 = 1 bleep per 2 seconds (medium priority) 3 = 4 bleeps per second (high priority) 4 = continuous (alarm priority) Display backlight: 1 = continuous	ON or OFF
CRM IV	Physical number 1 - 552	1-100 = DAK-key number 1023 = Buzzer 1024 = Display backlight	DAK-key: 1 = Red LED 2 = Green LED Buzzer: 1 = Internal buzzer 2 = External buzzer (relay) Display backlight: 1 = Backlight	DAK LED's: 1 = continuous (low priority) 2 = slow flash (medium priority) 3 = fast flash (high priority) Buzzers: 1 = 1 bleep per 8 seconds (low priority) 2 = 1 bleep per 2 seconds (medium priority) 3 = 4 bleeps per second (high priority) 4 = continuous (alarm priority) Display backlight: 1 = continuous	ON or OFF
DualDisplay	Physical number 1 - 552	1-100 = The DAK-key line	Always "1"	Video-state of the DAK-display: 0 = Normal 1 = Inverse 2 = Slow flash 3 = Fast flash	ON or OFF
PrisCom	kolonne 2	kolonne 3	kolonne 4	kolonne 5	kolonne 6

The state parameter is optional. If nothing is entered in this field, the indication is switched on/off along with the event. By entering OFF, for example, you can set an indication to turn off when the event turns on.

Example

IND  2  23  2  3  ON = Station 2, key 23, turn green led, fast flashing, ON

• CRM IV: LED and buzzer control
• CRM IV: Indicate status of remote stations in AlphaNet