Difference between revisions of "M-key (Event Type)"

Latest revision as of 14:23, 24 May 2022

Event description

Event Owner:	A station or an UDP group
Event type:	31 - M-key
Subevent:	0 = M key status when station is busy 1 = M key status when station is idle
When change to ON:	M key pressed
When change to OFF:	M key released
When related to:	N/A

Application

Delayed calls in elevators, parking etc.
Answer call requests by pressing M-key
Use the M-key as an additional call key for substations

Software requirement

Minimum software requirement: AMC 10.20

@@ Line 1: / Line 1: @@
+{{AI}}
 ==Event description==
 {|
 |-
-|width="100pt"|'''Event Owner''':
+|width="150pt"|'''Event Owner''':
 |width="300pt"|A station or an [[UDP]] group
 |-
 |'''Event type''': || 31 - M-key
 |-
-|'''Subevent''': || Sub Event = 0 will give M key status when station is busy.<br\>Sub Event = 1 will give M key status when station is idle.
+|'''Subevent''': || 0 = M key status when station is busy<br />1 = M key status when station is idle
 |-
 |'''When change to ON''': || M key pressed
@@ Line 19: / Line 20: @@
 == Application==
-Switch over a PA-system to a standby circuit
+* [[Delayed call from analogue station|Delayed call]]s in elevators, parking etc.
+* [[Answer call requests by pressing M-key]]
+* Use the M-key as an additional call key for substations
-== Additional information ==
+== Software requirement ==
-There is a default "Faulty Line" event which becomes active if one more stations are faulty. This event is used for general line error reporting. The reporting is configured from AlphaPro, Exchange & System -> RCI -> Faults: Faulty Line. Default setting is [[MST - Mail to Station|MST]] 1 0 28, which is by reporting line errors (28) to station 1.
+Minimum software requirement: AMC 10.20
-[[Category:Event Handler]]
-==Event description==
-{| border="1" cellpadding="4"
-! align="left"|[[Event Owner]]:
-| A station or [[UDP group]]
-|-
-! align="left"|[[Event Handler#Events Types - Grouped by Function|Event type]]:
-| 31 - M-key
-|-
-! align="left"|[[Sub-Event (Event Handler)|Sub-Event]]:
-| Sub Event = 0 will give M key status when station is busy.<br\>Sub Event = 1 will give M key status when station is idle.
-|-
-! align="left"|[[When Change to (Event Handler)|When Change to ON]]:
-| M key press
-|-
-! align="left"|[[When Change to (Event Handler)|When Change to OFF]]:
-| M key release
-|-
-! align="left"|[[When Related to (Event Handler)|When Related to]]:
-| N/A
-|-
-|}
 [[Category:Event Handler]]
+[[Category:Event types]]

Difference between revisions of "M-key (Event Type)"

From Zenitel Wiki

Latest revision as of 14:23, 24 May 2022

Event description

Application

Software requirement