M-key (Event Type)

Event description

Event Owner:	A station or an UDP group
Event type:	31 - M-key
Subevent:	Sub Event = 0 will give M key status when station is busy.<br\>Sub Event = 1 will give M key status when station is idle.
When change to ON:	M key pressed
When change to OFF:	M key released
When related to:	N/A

Application

Switch over a PA-system to a standby circuit

Additional information

There is a default "Faulty Line" event which becomes active if one more stations are faulty. This event is used for general line error reporting. The reporting is configured from AlphaPro, Exchange & System -> RCI -> Faults: Faulty Line. Default setting is MST 1 0 28, which is by reporting line errors (28) to station 1.

Event description

Event Owner:	A station or UDP group
Event type:	31 - M-key
Sub-Event:	Sub Event = 0 will give M key status when station is busy.<br\>Sub Event = 1 will give M key status when station is idle.
When Change to ON:	M key press
When Change to OFF:	M key release
When Related to:	N/A