Difference between revisions of "MultiModule over IP: Master module cannot find the Slave module"
From Zenitel Wiki
Line 2: | Line 2: | ||
A: In AlphaPro, '''Exchange & System''' > '''Serial Ports''' select ''Inter Module'' protocol. Make sure '''Port Type''' = N/A, and that the '''Enable''' flag is unchecked. | A: In AlphaPro, '''Exchange & System''' > '''Serial Ports''' select ''Inter Module'' protocol. Make sure '''Port Type''' = N/A, and that the '''Enable''' flag is unchecked. | ||
− | |||
[[Category: AlphaCom Troubleshooting]] | [[Category: AlphaCom Troubleshooting]] | ||
[[Category:MultiModule]] | [[Category:MultiModule]] |
Revision as of 12:52, 8 September 2017
Q: MultiModule over IP: After having converted an AlphaCom to an AlphaCom E, the Master module cannot find the Slave module.
A: In AlphaPro, Exchange & System > Serial Ports select Inter Module protocol. Make sure Port Type = N/A, and that the Enable flag is unchecked.