Noise Cancelling Industrial Master Station - 1007082000
From Zenitel Wiki
Features
- Fully equipped master station with free access to all extensions and features.
- Rugged waterproof and chip-resistant casing of orange makrolon.
- Noise cancelling microphone with protective flange.
- Red microphone live lamp.
- Built-in 10W (8 Ohm) VOX operated power amplifier.
- For use with external loudspeaker with or without power amplifier.
- Screw terminals for easy connection of installation cables.
Description
This industrial master station is a waterproof model designed for humid, dirty and outdoor conditions. The station consists of a rugged splashproof and chip-resistant casing of orange makrolon and has a folio keyboard on the front. The front panel is hinged to the back casing to allow easy access during installation and service. The station has screw terminals with labels for easy installation. Two glands ensure waterproof and dustproof connection of installation cable and loudspeaker wires.
The unit is equipped with a noise cancelling microphone preventing background noise from disturbing the conversation. A 20-70 Ohm external loudspeaker connects to the station or, alternatively, connect an 8-20 Ohm speaker for use with the built-in 10W (8 Ohm) VOX operated power amplifier. The external speaker must be placed at least one meter away from the station. The power amplifier requires separate 12V AC / 2 Amp power supply. The loudspeaker volume is adjustable with potentiometers located inside the casing and the station is programmable for permanent private mode by strap-plug setting inside the station.
The station is prepared for connection of a separate external handset.
Specifications
| Operating Voltage | From exchange without power amp. 12VAC/2Amp with power amp. |
| Cable Requirements | 2 pair 0.5mm²/24AWG twisted telephone cable. + 1 pair 0.8mm²/20AWG (to transformer if power amplifier is used) |
| Temperature | -50˚C to +55˚C |
| Relative humidity | 0% - 95% |
| Dimensions: (WxHxD) | 160 x 240 x 137 mm, 6.24" x 9.36" x 5.34" |
| Finish | Orange makrolon |
| Max. Loudspeaker Output | 1.5W (20 Ohm), 10W (8 Ohm) with power amplifier |
| Loudspeaker Impedance | 20-70 Ohm without power amplifier, 8-20 Ohm with power amplifier |
| Frequency Range | 500-5000 Hz (± 8dB) |
| Mic. Impedance for external handset | 200 - 600 Ohm |
| Connector Type | Screw terminals |
| Gland Diameter | 2 x PG9 |
| Indicator | LED (red) |
Installation
Wiring
Accessories
VML-1520
- Horn Loudspeaker, 15W/20 Ohm, IP-66
VMP-211
- Wall Mount Handset Unit (with PTT key), IP-44
VMP-250
- Wall Mount Handset Unit (with PTT key), IP-65
EOTRF-10115
- 220VAC/12VAC Mains Transformer (for power amplifier option)