Difference between revisions of "Simplex conversation (Event Handler)"
From Zenitel Wiki
(→Whole Exchange in Simplex Mode) |
|||
| Line 1: | Line 1: | ||
| + | {{A}} | ||
=General= | =General= | ||
This article describes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode. | This article describes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode. | ||
Revision as of 09:47, 11 January 2017
General
This article describes how you can override the voice-operated duplex (VOX), and set the system in Simplex (Press To Talk) mode.
Software requirement: AMC 10.52 or newer.
Whole Exchange in Simplex Mode
This event will set the whole exchange in simplex (Press To Talk) mode. Simplex mode will also work across AlphaNet.
In AlphaPro, go to Exchange and System -> Events, press Insert and create the following event:
- Owner: UDP 8 (All stations)
- Event Type: Conversation Outgoing
- When Change To: ON
- When Related To: All
- Action: @U%2.nod $SIMP L%2.dir U0 U1
Initial speech direction will be from B-subscriber towards A-subscriber.
If the Simplex mode should not apply to the whole exchange, but to a single station or a limited group of stations only, simply change the owner of the event to that single station, or include the relevant stations in an UDP group and set this UDP group as event owner.