Difference between revisions of "Stream audio from 3rd party"
From Zenitel Wiki
| Line 18: | Line 18: | ||
ffmpeg.exe -re -i "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" -ac 1 -acodec g722 -ar 16000 -f rtp rtp://10.5.101.30:4322 | ffmpeg.exe -re -i "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" -ac 1 -acodec g722 -ar 16000 -f rtp rtp://10.5.101.30:4322 | ||
| − | 165 = the Dummy | + | * 165 = the Dummy |
| − | U8 = G.722 | + | * U8 = G.722 |
| − | 10.5.101.133 = IP Address of PC | + | * 10.5.101.133 = IP Address of PC |
| − | 4322 = UDP port for audio | + | * 4322 = UDP port for audio |
| − | "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" = audio source 10.5.101.30 = IP Address of the AlphaCom | + | * "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" = audio source 10.5.101.30 = IP Address of the AlphaCom |
| + | |||
| + | [[Category:Applications]] | ||
Revision as of 14:29, 19 September 2019
This article describes how to stream audio from a 3rd party source to the AlphaCom or ICX using an IP Dummy:
- Install Ffmpeg on PC: http://adaptivesamples.com/how-to-install-ffmpeg-on-windows/
- From AlphaPro, create an IP Dummy, e.g. 165, and set codec = G722.
- In AlphaWeb - Filters, open an UDP port for incoming audio, e.g. 4322.
- Trigger the action command: $VAC L165 U8 '10.5.101.133' W1234 W4322
- From Windows command line, enter:
ffmpeg.exe -re -i "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" -ac 1 -acodec g722 -ar 16000 -f rtp rtp://10.5.101.30:4322
- 165 = the Dummy
- U8 = G.722
- 10.5.101.133 = IP Address of PC
- 4322 = UDP port for audio
- "C:\Programmer\ffmpeg\media\06 Paradise by the Dashboard Light.mp3" = audio source 10.5.101.30 = IP Address of the AlphaCom