Search results

Create the page "VS-Client Pulse Settings" on this wiki! See also the search results found.

Zenitel Client IMT Configuration
...st be configured from the VS-IMT (Intercom Management Tool). The following settings are configurable: * '''General Settings''': Directory Number, Display Name (Nickname on network), Server IP.

1 KB (165 words) - 14:55, 3 March 2022
Zenitel Client “Parking Management” Edition
'''Account Settings''' Network settings (Mode, Server IP, Display Name and Directory Number) are disabled. The only

3 KB (409 words) - 15:02, 3 March 2022
Zenitel Client
...Windowsbased Soft Client supported by the '''IC-EDGE System''' and the '''Pulse System'''. {{Obs|The client was earlier named VS-Client.}}

2 KB (213 words) - 14:48, 3 March 2022
IMT - Station Web Interface
...with IMT it is recommended that the station web interface is used only for settings that are not available in IMT. ...roject again. Existing stations in the project will be overridden and all settings will be updated.

2 KB (330 words) - 15:03, 16 August 2022
IMT - Intercom Management Tool
...project lets you set up an intercom system project using standard station settings. This method will directly modify the configuration file on the station. W ...ed when VS-SDK for Pulse is enabled in the system. See [[VS-IMT VS-SDK for Pulse System Setup]]

2 KB (297 words) - 12:03, 23 June 2023
Zenitel Client - Release Notes
===OV-26 VS-Client has been rebranded to Zenitel-Client=== === PHIX-245 Move VS-client documentation online ===

6 KB (807 words) - 09:09, 16 August 2022
VS-IMT VS-SDK for Pulse System Setup
...lication Protocol (ZAP). This type of project supports the easy setup of a Pulse system: * Upload license to Pulse server

9 KB (1,460 words) - 11:36, 29 June 2023
Backup and Restore (IP Stations)
...currently only needed if [[VS-IMT VS-SDK for Pulse System Setup|VS-SDK for Pulse]] is being used in the system (and VS-SDK project type used in VS-IMT). }} ...settings are not configurable and have specific value on each station. The settings are:

2 KB (247 words) - 12:06, 5 October 2023
Station auto-discovery and Configuration (Pulse)
...erver's StationWeb configuration pages it is very easy to set up a working Pulse system. ...ry: if we deselect a previously configured station it will be removed from Pulse server directory.

4 KB (594 words) - 17:21, 7 March 2019
VSIS-4.9 Release
* '''SDK for Pulse 1.3.3.0''': Updated SDK for Pulse system. * '''VS-Client 1.3.3.1''': Updated [[VS-Client|VS-Client]]

4 KB (664 words) - 10:05, 16 August 2022
VSIS-4.11 Release
* VS-Client ver. 1.3.3.2 - [[VS-Client|Soft Client]] for PULSE systems ...lients to 100. We shortened the registration interval to align it with our Pulse system. In line with our Cybersecurity strategy, constraint mode is now ena

5 KB (714 words) - 13:13, 16 August 2022
What's new
* '''SDK for Pulse''': Updated SDK for Pulse system. * '''VS-Client''': Updated [[VS-Client|VS-Client]]

7 KB (1,100 words) - 15:36, 11 March 2019
VSIS-4.7 Release
* '''SDK for Pulse''': Updated SDK for Pulse system. * '''VS-Client''': Updated [[VS-Client|VS-Client]]

7 KB (1,103 words) - 11:56, 5 April 2019
Pulse System Configuration
[[File:PulseSystem.PNG|thumb|400px|A Pulse System can contain any IP Station from Zenitel]] ...stations. Up to 16 stations can be used without the need of a license. The Pulse System is easy to install and configure. It can be configured using a stand

16 KB (2,446 words) - 14:15, 3 March 2022
Turbine 6.2 - Release notes
'''Compatibility: Pulse to IC-EDGE System'''<br> You can upgrade from Pulse (VS-IS 4.x) to IC-EDGE, but the whole system needs to run with the same Tur

6 KB (936 words) - 10:18, 23 June 2022
Software Upgrade (Edge)
...ice]] '''cannot''' serve as an Edge Controller, even if it was acting as a Pulse Server in the existing installation'' }} ...m version 4.x to version 5.x, a factory default is recommended for all new settings and features to take effect''

3 KB (499 words) - 09:54, 16 August 2022
Group Call (Pulse)
The Pulse system supports 4 Group Calls. Group call will work when Pulse system is installed within multiple inter-routable network subnets.

13 KB (2,064 words) - 15:57, 12 September 2019
Pulse System Description
{{warn|The PULSE system is obsolete, and is replaced by the [[:category:IC-EDGE System|IC-ED [[File:PulseBox (2).png|thumb|320px|Pulse System]]

12 KB (1,790 words) - 09:57, 18 August 2023
IEEE 802.1X
* Click '''Save''' to save the current settings * Click '''Reboot'''. The new 802.1X settings will only come into effect after a reboot.

12 KB (1,742 words) - 10:36, 7 November 2023
INCA 2.10 - Release Notes
* The resulting event in OnGuard will trigger an action: Pulse Door Unlock * VS-Client

8 KB (1,185 words) - 09:44, 18 February 2020

Special

Search results