View source for AlphaCom Recording Interface

[[File:RecordingMain.PNG|thumb|400px]]
=AlphaCom Recording Interface=
==General Description==
This article describes how to program the AlphaCom Recording Interface when used with 3rd party recorders. When used together with the STENTOFON Recorder Software please refer to the article ....
The AlphaCom Recording Interface has sofar been tested by Nice and CyberTech.
==AlphaCom Licenses==
To enable the Recording Interface on the AlphaCom XE audio server, an Active Recording Interface License is required. There are several types of licenses, all depending on the number of users in the system.
{| border="1"
! style="background:#ffdead;" width="200" |Item Number
! style="background:#ffdead;" width="200" |License
! style="background:#ffdead;" width="200" |No. of Users
|-
| 1009648092 ||align=center|Active Recording Interface||align=center|2
|-
| 1009648093 ||align=center|Active Recording Interface||align=center|6
|-
| 1009648094 ||align=center|Active Recording Interface||align=center|12
|-
| 1009648095 ||align=center|Active Recording Interface||align=center|36
|-
| 1009648096 ||align=center|Active Recording Interface||align=center|72
|-
| 1009648097 ||align=center|Active Recording Interface||align=center|138
|-
| 1009648098 ||align=center|Active Recording Interface||align=center|276
|-
| 1009648099 ||align=center|Active Recording Interface||align=center|552
|-
|}

In AlphaPro, it is possible to enable recording for as many specific intercom stations as the number of licenses purchased. To record both sides of a conversation, only one of the two stations in the conversation needs the appropriate flag enabled. <br/>
This means that in an installation with many substations and only a few master stations, where the substations are not able to call each other, only as many licenses are required as there are master stations. <br/>
When the recording interface is enabled (the license key has been inserted) it is also possible to record conferences and group calls. <br/>
To insert the Active Recording Interface license key for the AlphaCom server: <br/>
1. Start AlphaWeb from a web browser by entering the IP address of the AlphaCom server and logging in.
* The default username is '''admin''' and the default password is '''alphaadmin''' <br/>
2. Select the '''System Configuration''' tab and then '''Licensing''' and click '''Insert new License Key''' <br/>
3. Enter the license key into the input field and click '''Insert Key''' <br/>
4. Accept the Terms and Conditions by clicking '''Yes'''
* The license key is now inserted but not yet activated. <br/>
5. To activate, click '''Yes''' to the question '''Do you want to reset the amc system now?'''

==AlphaPro Programming==
The following sections describe the programming of the Recording Interface, Stations, Group Calls, and Conferences in AlphaPro.

===Programming Recording Interface===
[[File:Recording5.PNG|thumb]]
In AlphaPro, programming of the Recording Interface is done under the Recording tab in the dialog box where all system-wide information is programmed: <br/>
1. Open AlphaPro <br/>
2. Click the '''Exchange & System''' icon <br/>
[[Image:Exchange icon.jpg]] <br/>
3. Click the '''System button''' <br/>
4. Click the '''Recording tab''' <br/>
 ''Note that after sending the changes to the AlphaCom audio server, the server needs to be reset in order to activate the changes which are made as described''
 ''in this section.''

====Recorder Registration====
The STENTOFON Recorder Software registers with AlphaCom as a SIP device.
* If only one recorder is used, enter its registration name in the '''Username''' field for '''Primary Recorder'''.
* If there is a redundant recorder as well, enter its registration name in the '''Username''' field for '''Secondary Recorder'''.
AlphaCom will first attempt to record a conversation on the Primary Recorder but if that recorder is not available, the Secondary Recorder will be used. <br/>
Note that the '''IP Address''' field is not relevant for this application and should be left empty.

====Audio Streams====
The RTP audio stream characteristics should be set as follows
* Uncheck the '''Need Single RTP''' box
* Check the '''All''' box under '''Codecs'''
The STENTOFON Recorder Software is able to capture multiple RTP streams for a conversation. Hence, it is not necessary to force AlphaCom to mix those streams into a single stream. <br/>
The STENTOFON Recorder Software also supports all the codecs that are supported by AlphaCom. It is therefore not necessary to force a transcoding to a specific codec.

===Programming Stations===
[[File:Recording6.PNG|thumb]]
To program the stations for recording in AlphaPro: <br/>
1. Click the '''Users & Stations''' icon <br/>
[[File:AlphaPro users icon.jpg]]
2. Click the '''General''' tab <br/>
In the dialog box there are 2 flags for each station:
* Recording – Incoming
* Recording – Outgoing
 <br/>
 <br/>
By enabling these flags, it can be determined whether only incoming or outgoing calls should be recorded, or both. Note that only as many stations should be selected for recording as recording licenses have been purchased to avoid calls not being recorded. <br/>
By default, the Incoming and Outgoing boxes are unchecked. <br/>
In a system where most stations require recording, click the Apply to All button. The recording flag for all 552 users will then have the same settings as that for the station where the Apply to All button is selected. <br/>
Conversations within the same AlphaCom will only be recorded once, even if both stations in the conversation have both recording flags enabled. <br/>
If one of the stations has the appropriate recording flag enabled, the conversation will be recorded independent of whether any recording flags are enabled for the other participant in the conversation. <br/>

===Programming Group Calls===
[[File:Recording7.PNG|thumb]]
When a recording license is present, all local and global group calls are recorded by default, regardless of whether stations have a recording flag enabled or not. Recording of specific local and global group calls can be disabled by deselecting the recording flag for the group call. <br/>
To program Groups for recording in AlphaPro under the '''General''' tab:
* Click the '''Groups''' icon
[[File:AlphaPro group icon.jpg]]
** select either '''Local Groups''' or '''Global Groups'''
* Enable or disable the recording flag as required by checking or unchecking the '''Recording''' box.

===Programming Conferences===
[[File:Recording8.PNG|thumb|Simplex Conference]]
[[File:Recording9.PNG|thumb|Open Duplex Conference]]
When a recording license is present, all simplex and duplex conferences are recorded by default, regardless of whether stations have a recording flag enabled or not. Recording of specific conferences can be disabled by deselecting the recording flag for the conference. <br/>
In AlphaPro, click the '''Simplex Conferences''' or '''Open Duplex Conferences''' icon and select the appropriate conference.
[[File:AlphaPro SX conference icon.jpg]]
[[File:AlphaPro ODX conference icon.jpg]]
* Enable or disable the recording flag as required by checking or unchecking the '''Recording''' box.

==AlphaNet==
[[File:Recording10.PNG|thumb]]
Similar to stations, each AlphaNet link also has 2 recording flags associated with it, for incoming and outgoing calls. By default, both these flags are enabled. <br/>
For the recording of AlphaNet calls, the rule is:
* Record incoming call if the '''Incoming''' flags for both the station AND the source node are enabled
* Record outgoing call if the '''Outgoing''' flags for both the station AND the destination node are enabled 
This makes it possible to select the side on which to record an AlphaNet call or to have the option to record the call at both ends. <br/>
The AlphaNet recording flags are part of the '''Exchange & System > Net Routing''' dialog box:
<br/>
The STENTOFON Recorder Software licensed as Standard or Enterprise is able to register with many AlphaCom XE audio servers simultaneously, so that even in a large AlphaNet it is possible to use just a single recorder. However, in geographically dispersed systems, it may be advisable to have recorders at different locations.
 ''Note that every AlphaCom XE audio server in an AlphaNet requires its own recording licenses.''