View source for CRM V - Control Room Master

[[Image:IP Flush Master.jpg|thumb|150px|CRM V - Control Room Master Module]]
[[image:CRM Full.png|thumb|300px|CRM V with all optional modules]]

The '''CRM-V''' Station is designed for control room applications. The station consists of a main module (IP Flush Master), which can be extended with up to two IP DAK-48 Units and a handset module.

This article describes how to configure the  CRM-V station.

== Available items ==
<gallery class ="left">
File:IP Flush Master.jpg|[[IP Flush Master - 1008031000|IP Flush Master]]
File:DAK48.jpg|[[DAK48 module - 1008010100|DAK 48 Unit]]
File:80971 RS.jpg|[[Handset for IP Flush Master - 1008097100|Handset]]
File:80975 RS.jpg|[[Gooseneck Microphone - 1008097500|Gooseneck Microphone]]
File:Stand.png|Desktop Stand
</gallery>

== Installation ==
For installation of the CRM V, and connecting additional modules please see the [[IP Station Installation]] article.

===Handset mounting===
See: [[IP_Station_Installation#Handset|Handset installation and mounting]]

===DAK48 Expansion module===
See: [[IP_Station_Installation#IP_DAK-48_Unit|D48 Installation and Mounting]]

===Headset use===
See: [[IP Flush Master and Headset]]

===Gooseneck mounting===
See: [[IP_Station_Installation#Gooseneck_Microphone_for_IP_Master|Gooseneck Microphone Installation and Mounting]]

== Station Type ==
By setting a station to [[Users_%26_Stations_(AlphaPro)#General|'''Station Type''': ''CRM'']] in AlphaPro the display layout will change from the standard two line display to a four line display.
[[File:CRM 5.PNG|left|500px|thumb]]
<br style="clear:both;" />
The display on the station will instead of showing the date, time and station number and name, only show the date and time in the top line. Line 2 and 3 are used for the queue navigation, and line 4 is used for labelling the navigation keys when there is an entry in the queue.

The CRM station type selection will also turn on the backlight constantly.

== Queue Navigation ==
Incoming mails (typically [[Call Request|Call Requests]]) to a CRM station will form up a [[Mail Queue Operation|queue]] in the order they are coming in, where the last mail is at the bottom. All incoming mails have a [[SEND_MAIL#Mail_priority|priority]] (0-255), and a mail with priority higher than the ones in the queue already will go straight to the top. The four navigation keys below the display can be used to navigate the queue, and will be visible only when there are any entries in the queue.

The default navigation keys for a CRM are (from left to right):
* 7638 = Answer (Answer the highlighted mail by calling back to it)
* 7639 = Next (Go to the next mail in the queue)
* 7632 = Top (Go to the first mail in the queue)
* 7630 = Delete (Delete the highlighted entry)

The navigation keys can be configured using AlphaPro:
[[File:CRM 9.PNG|left|thumb|500px|Users & Stations &rarr; DAK: Queue operation codes]]
<br style="clear:both;" />

==LED Control ==
The IP Flush Master has four DAK keys. In addition the station can be fitted with up to two DAK-48 panels to make a total of 100 DAK keys. of which all have two LED's each.
[[File:CRM 14.PNG|left|thumb|500px]]
<br style="clear:both;" />

The two LED's (red and green) can be controlled individually using the [[IND]] command in the [[Event Handler]].

Typical events to control LED's:

===Call Request ===

To turn on the red led, flashing fast, in the associated DAK key when a [[Call Request|Call Request]] is received, create this event:

[[Image:CRM 1.PNG|left|500px|thumb]]
<br style="clear:both;" />
{| 
|-
|width="100pt"|'''Event Owner''':
|width="300pt"| The CRM-V station or a group of CRM-V stations || ''Enter the physical station number or the UDP group number''
|-
|'''Event type''': || 10 - Received mail
|-
|'''Subevent''': || N/A
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || All
|-
|'''Action''': || [[IND]] %1.phy %1.dak(I%2.dir) 1 3 || ''Replace I%2.dir with I2%.dir* to make it work with DAK keys containing longer strings e.g. "I202 M"''
|-
|}

===Outgoing Conversation===

To turn on the green led in the associated DAK key when an outgoing call is made, create this event:


[[Image:CRM 2.PNG|left|500px|thumb]]
<br style="clear:both;" />
{| 
|-
|width="100pt"|'''Event Owner''':
|width="300pt"| The CRM-V station or a group of CRM-V stations || ''Enter the physical station number or the UDP group number''
|-
|'''Event type''': || 08 - Conversation - Outgoing
|-
|'''Subevent''': || N/A
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || All
|-
|'''Action''': || [[IND]] %1.phy %1.dak(I%2.dir) 2 1 || ''Replace I%2.dir with I2%.dir* to make it work with DAK keys containing longer strings e.g. "I202 M"''
|-
|}

===Incoming Conversation===


To turn on the green led in the associated DAK key when an incoming call is received, create this event:

[[Image:CRM 3.PNG|left|500px|thumb]]
<br style="clear:both;" />
{| 
|-
|width="100pt"|'''Event Owner''':
|width="300pt"| The CRM-V station or a group of CRM-V stations || ''Enter the physical station number or the UDP group number''
|-
|'''Event type''': || 07 - Conversation - Incoming
|-
|'''Subevent''': || N/A
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || All
|-
|'''Action''': || [[IND]] %1.phy %1.dak(I%2.dir) 2 1 || ''Replace I%2.dir with I2%.dir* to make it work with DAK keys containing longer strings e.g. "I202 M"''
|-
|}

===Door Status===

An input of the IP substation can be connected to a door magnet, providing indication on the DAK panel, showing if the door is open or closed.

Example: <br>
To turn on the red led in the associated DAK key when input 3 of the station is activated, create this event:

[[Image:CRM 4.PNG|left|500px|thumb]]
<br style="clear:both;" />
{| 
|-
|width="100pt"|'''Event Owner''':
|width="300pt"| The Door Station or a group of Door stations || ''Enter the physical station number or the UDP group number''
|-
|'''Event type''': || 30 - Station DAK key as RCI
|-
|'''Subevent''': || 3 || ''Equal to the IP station [[RCI#Configuration|input]] that is used''
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || All
|-
|'''Action''': || tmp 0 "%1.dir" || ''Temporarily store the station directory number''
|-
| &nbsp; || OWN 105  || ''Set the CRM directory number as owner of the event''
|-
| &nbsp; || IND %1.phy %1.dak(I%tmp(0)) 1 1
|-
|}

===Station Down===

To turn on the red and green led in the associated DAK key when a station is reported faulty, create this event:

[[Image:CRM 15.PNG|left|500px|thumb]]
<br style="clear:both;" />
{| 
|-
|width="100pt"|'''Event Owner''':
|width="300pt"| A group of stations || ''Use UDP group 8 for all stations''
|-
|'''Event type''': || 13 - Faulty station line
|-
|'''Subevent''': || 0
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || N/A
|-
|'''Action''': || tmp 0 "%1.dir" || ''Temporarily store the station directory number'' 
|-
| &nbsp; || OWN 105 || ''Set the CRM directory number as owner of the event''
|-
| &nbsp; || IND %1.phy %1.dak(I%tmp(0)) 1 1
|-
| &nbsp; || IND %1.phy %1.dak(I%tmp(0)) 2 1
|-
|}

== DAK Redirection ==
[[File:CRM 10.PNG|left|thumb|500px|DAK Layout]]
<br style="clear:both;" />

Unused DAK tables from other stations must be borrowed to extend the CRM DAK table. CRM's using the same DAK layout can redirect to the same tables. 
[[File:CRM 11.PNG|left|thumb|500px|Redirecting DAK table to physical 501, 502 ... 510]]
<br style="clear:both;" />

The DAK key configuration must be performed at the users DAK table to which the original CRM DAK table is pointing:
[[File:CRM 12.PNG|thumb|left|500px]]
<br style="clear:both;" />

[[File:CRM 13.PNG|left|thumb|500px|Here DAK 91-100 is shown configured from the DAK table at physical #510]]
<br style="clear:both;" />

== Call Forwarding ==
Manual:
* Call Requests are forwarded using the feature code 7870 + destination directory number
* Regular point to point calls are forwarded by using the feature code 71 + destination directory number
* To reset the call forwarding, dial 70. 

Automatic:
A typical CRM application is to transfer calls and call requests from a local guard to a main guard. In the example below two scenarios are shown:

1: The local guard is leaving his station for a while and transfers all calls and call requests to the main guard (directory number 110) by pressing D1 (DAK 1).

DAK 1 is configured with an [[Event Trigger (Event Type)|event trigger]]:
[[File:CRM 16.PNG|thumb|left|500px]]
<br style="clear:both;" />

When a CRM station presses D1 an event trigger (9534) is dialled triggering an event:
[[Image:CRM 17.PNG|left|500px|thumb]]
<br style="clear:both;" />
{| 
|-
|width="100pt"|'''Event Owner''':
|width="400pt"| The CRM-V station or a group of CRM-V stations || ''Enter the physical station number or the UDP group number''
|-
|'''Event type''': || 15 - Event Trigger Feature
|-
|'''Subevent''': || 0
|-
|'''When change to''': || ON
|-
|'''When related to''': || Directory Nnumber: 9534
|-
|'''Action''': || IF %udd(%1.dir) || ''Toggle function: checks transfer status''
|-
| &nbsp; || $TRF L%1.dir "" || ''Remove call transfer''
|-
| &nbsp; || $SCRT L%1.dir || ''Remove Call Request transfer''
|-
| &nbsp; || IND %1.dir %1.dak(I%2.dir) 1 1 OFF || ''Turn off red LED in D1''
|-
| &nbsp; || LOG "Transfer deactivated from %1.dir %1.nam to Main Guard" || ''Log the action''
|-
| &nbsp; || WUDD %1.dir 0 || ''Toggle function: set transfer status to off''
|-
| &nbsp; || STOP
|-
| &nbsp; || ENDIF
|-
| &nbsp; || $TRF L%1.dir "I110" || ''Set call transfer to Main Guard''
|-
| &nbsp; || $SCRT L%1.dir L110 || ''Set Call Request transfer to Main Guard''
|-
| &nbsp; || IND %1.dir %1.dak(I%2.dir) 1 1 ON || ''Turn on red LED in D1''
|-
| &nbsp; || LOG "Transfer activated from %1.dir %1.nam to Main Guard" || ''Log the action''
|-
| &nbsp; || WUDD %1.dir 1 || ''Toggle function: set transfer status to on''
|-
|}

''See also:''
* ''[[Forward unattended Call Request (Event Handler)]]''
* ''[[Forwarding of Call Request to external telephone]]''

== Additional Settings ==
===Autosearch===
Calls and Call Requests can be forwarded automatically to a predefined receiver if unanswered :
[[File:CRM 18.PNG|thumb|left|500px|Users & Stations &rarr; Automatic Search]]
<br style="clear:both;" />

[[File:CRM 19.PNG|left|thumb|500px|Users & Stations &rarr; DAK]]
<br style="clear:both;" />

===Audio Indication===
 See: ''[[Call_request#Call_Request_notification_when_Station_type_is_set_to_.22CRM.22|Call Request Notification when Station type is set to CRM]]''

 Default Priority level    Arrival notification    Queue notification
 -----------------------------------------------------------------------
   0 –  59                 No tone                 Beep every minute
  60 – 119                 Dut-dut-dut tone        Beep every minute
 120 – 149                 Dut-dut-dut tone        Urgent Feature Reminder (configurable)
 150 – 255                 No tone                 Private ringing tone

To configure the [[Urgent feature reminder]]:
[[File:CRM 20.PNG|thumb|left|500px|Exchange & System &rarr; System &rarr; Calls and Options]]
<br style="clear:both;" />

To change the default priority levels:
[[File:CRM 21.PNG|thumb|left|500px|Exchange & System &rarr; System &rarr; Calls and Options]]
<br style="clear:both;" />

==Applications==
See [[:Category: Control Room Applications]]

[[Category: Control Room Stations - CRM]]