View source for IP-ARIO Restore Factory Defaults

[[File:IP-ARIOConfig10.PNG|thumb|right|400px|Front view]]
To configure the IP-ARIO unit with Factory Default IP Settings do the following:
# Disconnect power to the unit. <br/>
# Reconnect power and within 5 seconds, use a pin to press and hold the pinhole Reset button (on the front right of the unit).
# Keep the Reset button pressed until the CALL LED emits 3 slow flashes followed by 3 fast flashes as confirmation that the unit is reset. (Takes appr. 25 seconds)
# Release the Reset button.
The unit’s IP settings will now be reset to factory default.

{| class="wikitable" 
!style="background:#ffdead" colspan="2"|Factory default values
|-
| Station Mode || align=center | '''AlphaCom'''
|-
| Station IP address || align=center | '''169.254.1.100'''
|-
| AlphaCom IP address || align=center | '''169.254.1.5'''
|-
| Username* || align=center | '''admin'''
|-
| Password* || align=center | '''alphaadmin'''
|-
|}

 * Software 01.06 and earlier: '''ADMIN/alphacom''')

[[Category: INCA - Restore Factory Defaults and Software Upgrade]]