View source for ENA Amplifier - Monitoring

{{A}} Monitoring of the ENA Amplifier

In the Monitoring and Lines tab, you can configure Speaker Line Monitoring, LET Monitoring, RCI and RCO monitoring and Line-In monitoring. This will report faults whenever there is something wrong with the amplifier or connected speaker lines.

Channel 1 is the main directory number for the amplifier. All monitoring is reported as an event at this directory number, with separate sub-events for each channel. All station faults that are configured to be reported will automatically show up in the System log of the AlphaCom server, and trigger [[Station Fault (Event Type)|Event 43 Station Fault Report]], and the sub-event indicating what type of fault.

After configuring speaker line monitoring, the channel needs to be calibrated. This should not be done when there is a call active or audio on the speaker line. The option ''Suspend Monitoring'' will turn off monitoring when there is audio on the channel output.


[[Category:Public Address]]