View source for Software Upgrade (Edge)

{{E}} {{cons}}
The software of the Vingtor-Stentofon devices in an [[:Category:IC-EDGE System|IC-EDGE System]] can be mass upgraded in two ways. Either:
* by using the [[IMT|VS-IMT]] tool
* from the Edge Controller

Contact [mailto:support.usa@zenitel.com?Subject=Software%20for%20IC-EDGE%20System support.usa@zenitel.com] to get the latest software version for Edge devices.

== Upgrade using the VS-IMT tool ==
For a detailed procedure, see the [[VS-IMT Upgrade Stations]]

<br>

== Upgrade from the Edge Controller ==
===Prerequisites===
# A TFTP Server must be available. A TFTP server can be downloaded from here: http://tftpd32.jounin.net/tftpd32_download.html.
# Unzip the software package and store the files in a folder on your PC.
# Check if your local firewall is '''not''' blocking incoming ping/ICMP  (Turbine station is pinging TFTP Server during update process)
<br>

The upgrade procedure is slightlty different depending on if it is a Turbine device or an INCA device.

=== Upgrade procedure - Turbine devices ===
* Start the TFTP server program and click '''Browse''', and select the folder where the software files are located

[[File:Edge TFTP.PNG|thumb|left|700px|TFTP Server - Browse to the folder where the software files are located]]
<br style="clear:both;" />

* Start a web browser (e.g. Firefox or Chrome), and [[Logging into an IP Station|Log on to the Edge Controller]]. Select '''Edge Controller''' > '''Software Upgrade'''
* Enter the IP address of the '''TFTP server''' (I.e. the IP address of your PC)
* Enter the '''Image File''' name, e.g '''vsft-5.0.3.0''', select which stations to upgrade, and click '''Upgrade'''.

[[File:Edge SoftwareUpgrade.PNG|thumb|left|700px|Enter TFTP server, firmware and check which stations to upgrade]]
<br style="clear:both;" />

The upgrade procedure takes about 3 minutes. The process can be monitored by clicking the '''Log viewer''' tab in the TFTP server program.

{{obs|'''Do not unplug devices during the upgrade!''' }}

{{note|If video is not working after having upgraded the [[:Category:Stations#Turbine_stations|Turbine Video Station TCIV-x]] to firmware version 4.11, see article [[TCIV - No video after upgrading to v. 4.11]]}}
<br>

=== Upgrade procedure - INCA devices ===

[[Category: IC-EDGE Configuration]]