View source for ELSII-10H

{{AEIPS}}[[File:Horn.PNG|thumb|350px|Turbine IP Speaker<br>(1023301310)|alt=]]
==Getting started==

*[[TKIS Connections|Connections]]
*[[Starting Up Turbine Station|Starting up]]

==Configuration==
The loudspeaker can operate in three different modes, depending on what kind of server it should register to. Choose one of the links below according to what mode you need to configure.

* [[IP Station Configuration - ICX-AlphaCom mode|ICX-AlphaCom mode]]
*[[Adding station to existing system (Edge)|Edge mode]]
*[[SIP Intercom Configuration|SIP mode]]
*[[IP Station Configuration - Pulse mode|Pulse mode]]

==Restore Factory Defaults and Software Upgrade==
The ELSII-10H IP Speaker has a Turbine kit [[TKIS-2]] inside.

*[[TKIS Restore Factory Defaults|Restore Factory Defaults]]
*[[Turbine Software Upgrade|Upgrade via the station web interface]]
*[[VS-IMT Upgrade Stations|Upgrade using the IMT tool]]
*[[Automatic Software Upgrade|Automatic Software Upgrade (SIP mode only)]]
* [[:Category:IMX28 Release notes|Software Release Notes]]

==Connectors, Indicators and Dimensions==
The ELSII-10H IP Speaker has a Turbine kit [[TKIS-2]] inside.

*[[Turbine Compact Board Connectors|Board Connections]]
*[[TKIS Indication LEDs|Station Indication LEDs]]
*[[Speaker Dimensions & Mounting Instructions|Dimensions]]

==Software Requirements==
This station is fully supported as from AlphaCom version 11.2.3.7

==Related Information==

*[http://www.zenitel.com/product/elsii-10h Additional Documentation on Zenitel.com]

[[Category: Turbine]]
[[Category:Public Address - Network amplifiers]]