View source for Turbine Extended series board connectors

{{AEIS}}
<br clear=all/>


[[File:TKIE-2Drawingwithnumbers.png|thumb|left|500px|Turbine Extended connectors]]
<br clear=all/>

{| border="1" }
| align="center" style="background:#ffd400;" |'''Item'''
| align="center" style="background:#ffd400;" |'''Description'''
| align="center" style="background:#ffd400;" |'''''Comment'''''
|-
| 1¹ || 2 Relays || Double Throw (SPDT) relay contact with 60W switching power. Max: 250VAC/220VDC, 2A, 60W
|-
| 2¹ || I/O interface|| 6 general purpose I/Os. Each I/O can be configured either as an input or 12mA LED driver output
|-
| 3¹ || Line Output || Balanced 600 ohm audio line out. Suitable for external induction loop amplifier, PA amplifiers etc
|-
| 4¹ || Speaker Output || Connection for 8 ohm loudspeaker
|-
| 5¹ || Microphone Input || Electret mic input
|-
| 6 || TA-10 connector || Connection for [[TA-10]] Relay Module
|-
| 7¹ || Power Input || Optional 24VDC power input from external power supply (if PoE is not provided)
|-
| 8 || LAN Port || Dual 10/100Mbps RJ-45 port for Ethernet connection (inbuilt switch). PoE is supported
|-
| 9 || AUX || Auxiliary connector for Handset and Headset, and Line IN <br> * Headset/handset speaker (pin 6/7): Minimum 32 Ohms <br> * Microphone input (pin 4/5): For electret type. Bias voltage is 1,25V. <br> * Line In: Maximum input level is 1.228 Vrms (Professional line level).
|-
|}

{{Note|
¹) Connectable conductors:  0.20 - 1.5 mm² (IEC) / 24 - 16 AWG (UL). Use of ferrules is recommended. Max cable size is then 0.75 mm².
}}

{{Note| 
* Relay switching capacity: Max. 60 watt (Max voltage: 250VAC/220VDC. Max current: 2A)
* The 5,3V output can deliver 200mA current maximum}}

{{Note|
If connected to two PoE-capable switches, only one of the ports will negotiate PoE; hence this is not a good solution for power redundancy (switch failure might lead to a reboot). Instead a “dumb” PoE injector (spare-pair power) should be used for the two Ethernet ports or a local 24 VDC local power backup.
<br>If used together with PoE the station can be powered by 24 VDC as a local power backup.
}}

=== J9: Keyboard connector ===
Only available on TKIE-3. See [[Keyboard_matrix_-_TKIE-3|keyboard matrix article]] for details.


[[Category: Turbine Connections]]