View source for MPS Button Configuration (VIPA Configuration Tool)

{{L}}
The button type is defined by the type property of the button.  This is set from the drop-down list in the "Type" field of the Required Settings category of the button's '''''Add Button''''' edit window.  The following button types can be configured:
==Page Button==
This button selects PA zone(s) for an announcement.  A single zone or a list of zones is defined in the zones property, where each zone equates to an audio output on a VIPA device (local or remote). After the button is pressed, a green zone selection LED will flash to indicate the zone(s) is selected. The main PTT button is then pressed to make a live announcement to the selected zones.
* Right-click on the Microphone in the Navigation window and select '''''Add''''' > '''''Button'''''
===Required Settings Tab===
* Choose which button '''''Number''''' you want to assign to the button. This will correspond with any physical buttons on the MPS if present, or selectable zones via the front panel menu if you are configuring an MPS01.
* Set the button '''''Type''''' to '''''Page'''''
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[File:VAIA_MPSButton_Req.PNG|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS Page Button Required Settings</td>
</tr>
</table>
===Optional Settings Tab===
* Select the zone(s) you want the live announcement to route to (in the example below all zones have been selected)
* Press '''''Apply'''''
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[File:VAIA_MPSButton_Opt.PNG|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS Page Button Optional Settings</td>
</tr>
</table>

==DVA Button==
This button will trigger and pre-recorded DVA stored in the VAIA's /dva/msgs/dist directory. The the path and filename of the DVA has to be entered into the "Filename box" e.g. '''''/dva/msgs/dist/PleaseStandBack.wav'''''
* Right-click on the Microphone in the Navigation window and select '''''Add''''' > '''''Button'''''
===Required Settings Tab===
* Choose which button '''''Number''''' you want to assign to the button. This will correspond with any physical buttons on the MPS if present, or selectable zones via the front panel menu if you are configuring an MPS01.
* Set the button '''''Type''''' to '''''DVA'''''
* Enter the the path and filename of the DVA into the '''''Filename''''' box e.g. '''''/dva/msgs/dist/PleaseStandBack.wav'''''
* Select the DVA Button '''''Mode'''''. The two possible options and their functionality are as follows:
** '''''Trigger''''' - Button press will only trigger the DVA. A separate '''''DVA Reset''''' button is required to terminate the DVA playing
** '''''Toggle''''' - 1st button press will trigger the DVA 2nd button press will cancel the DVA after its current play.
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[File:VAIA_MPS_DVAButton_Req_b.PNG|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS DVA Button Required Settings</td>
</tr>
</table>

===Optional Settings Tab===
* Select the zone(s) you want the DVA to route to (in the example below all zones have been selected)
* The '''''Keylock''''' option allows you to select whether the button can be activated with or without Keylock protection:
<ul style="list-style-type:none;">
<li>'''''Unprotected''''' - DVA Button will trigger the DVA without MPS Keylock on</li>
<li>'''''Protected''''' - Keylock has to be activated for DVA button to be active</li>
<li><table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[File:VAIA_MPS_DVA_KeySw_Opt.PNG|200px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS Keylock location</td>
</tr>
</table></li>
</ul> 
* Leave the '''''Priority''' as the default '''''Use microphone priority''''' option. (Advanced Setting)
* Leave the '''''Permissions''''' box checked so that the microphone permissions are used. (Advanced Setting)
* Set the DVA '''''Play Count'''''. This is the number of time the DVA will play.
* Set the '''''Gap''''' in seconds between DVA plays if configured to play more than once. 
* Press '''''Apply'''''
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:VAIA_MPS_DVAButton_Opt_b.PNG|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS DVA Button Optional Settings</td>
</tr>
</table>

==DVA Reset==
This button will terminate a DVA triggered by a button configured in DVA '''''Trigger''''' mode. It can be configured to terminate a single or multiple DVA trigger buttons
* Right-click on the Microphone in the Navigation window and select '''''Add''''' > '''''Button'''''
===Required Settings Tab===
* Choose which button '''''Number''''' you want to assign to the button. This will correspond with any physical buttons on the MPS if present, or selectable zones via the front panel menu if you are configuring an MPS01.
* Select '''''Type''''' > '''''DVA Reset'''''
* Select which DVA trigger button this button will reset
* Select '''''Apply'''''
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:VAIA_MPS_DVAResetButton_Req.PNG|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS DVA Reset Button Required Settings</td>
</tr>
</table>

==Mute Button==
Pressing this button mutes the audio to the zone or group of zones defined in the zones property.
* Right-click on the Microphone in the Navigation window and select '''''Add''''' > '''''Button'''''
* In the '''''Required Settings''''' choose which button '''''Number''''' you want to assign to the button. This will correspond with any physical buttons on the MPS if present, or selectable zones via the front panel menu if you are configuring an MPS01.
* In the '''''Required Settings''''' set the button '''''Type''''' to '''''Mute'''''
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[File:VAIA_MPSMuteButton_Req.png|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS Mute Button Required Settings</td>
</tr>
</table>
* In the '''''Optional Settings''''' select the zone(s) you want to mute. In the example below zone: ticket_hall will be muted.
* Press '''''Apply'''''
<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[File:VAIA_MPSMuteButton_Opt.png|600px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>MPS Mute Button Optional Settings</td>
</tr>
</table>

==Listen-In Button==
After a Page button has been pressed, this button will '''''Listen-in''''' to any PMC Output that has been assigned to the ''listenin'' Audio Group on any VIPA device capable of streaming output audio over the IP network to a host system.
==BGM==
This button routes preconfigured background music to the zone or group of zones defined in the zones property.
==Fault Status==
This button has no effect, but the red LED indicator monitors faults on a VIPA device.
==Fault Clear==
This button clears faults on a VIPA device. The button can be configured to clear faults only on the local VIPA device to which it is attached if the "target" property in "Optional Settings" of the button is left blank or on a remote VIPA device if the "target" property of the button identifies the remote VIPA device is added. 
==Fault Accept==
This button will Accept any faults on a VIPA device to inhibit any audible alarms. The latched fault will remain until a Fault Clear is issued.
<br>
[[VAIA Configuration]]