View source for ZIPS 9.3 - Release notes

* Previous Release - [[ZIPS 9.2 - Release notes]]

This document provides the release notes for VSF-Fortitude Audio Only 9.3 with incremental bug fix releases. The release notes describe new features, improvements and issues fixed after VSF-Fortitude Audio Only 9.2.3.0.

==Release info==
'''Name:''' VSF-Fortitude Audio Only <br>
'''Description:''' VSF-Fortitude Audio Only is a firmware for [[Zenitel Devices based on iMX8M Nano|Zenitel devices based on the IMX8M Nano processor]].

The firmware is delivered in two different files:

*vsff8mn-9.3.3.x - Used for standard in-field upgrades
*vsff8mn-prod-9.3.3.x - Used in production- and recovery upgrades.

'''Version:''' 9.3.3.0<br>
'''Date:''' 01.10.2025 <br>
'''Status:''' General available<br>

<br>

=VSF-FORTITUDE Audio Only 9.3.3.1=
== Security Updates ==
=== MTN-4866 Security Update ===
Resolved vulnerabilities related to:
* CVE-2025-64090 - Authenticated RCE on Hostname configuration.

Action: Upgrade to 9.3.3.1 or later (8.2.3.5 for legacy TCIV)

=== MTN-4865 Security Update ===
Resolved vulnerabilities related to:
* CVE-2025-64091 - Authenticated RCE on NTP configurations.

Action: Upgrade to 9.3.3.1 or later (8.2.3.5 for legacy TCIV)

<br>

=VSF-FORTITUDE Audio Only 9.3.3.0=
== Improvements==
=== MTN-4701 Duplicate Hardware Version information ===
Duplicate Hardware Version information in station web has been removed. Hardware Version information can be found in Hardware Revision.

=== DS-1560 Edge Controller: Batch Upgrade Feature removed=== 
The Edge Controller batch upgrade feature has been removed. Batch upgrades should now be performed using IMT, which provides greater flexibility and efficiency. Devices can still be updated individually via the web interface.

<br>

== Fixed issues ==
=== MTN-4796 ONVIF Subscribe Enhancements=== 
Subscription requests now accept any namespace in the Address field.

The “wsnt:Filter” element is now optional. If omitted, the subscription will include all topics by default.

=== MTN-4769 It is now possible to play Audio message on triggering Relay or Output ===
It is now possible to play an audio message when triggering a Relay or Output. Previously, nothing was shown when selecting Relay for an Event under Audio Messages. Relay and Output are now available for selection.

=== MTN-4742 ONVIF Improvement: Default Video Source Configuration=== 
GetVideoSourceConfigurationOptions now returns a default video source configuration even when no configuration is specified.

=== MTN-4717 Volume Override Level and Automatic Volume Control (AVC) configuration ===
Volume Override Level and Automatic Volume Control (AVC) configuration on IP Speakers (ZIPS) are now configurable from the Edge Controller

=== MTN-4688 Fixed issues with ONVIF backchannel RTSP failures on missing media=== 
Now always creating full media pipeline for backchannel to ensure better compatibility.

=== MTN-4681 Ringing tone in ICX/AlphaCom now depends on setting in AlphaPro=== 
Ringing tone level in ICX/Alphacom mode was low and did not respond to the Ringing Volume setting configured in AlphaPro. This is now fixed, ringing tone level is higher and dependent on value set in AlphaPro.

=== MTN-4656 Fixed numbers of GPIOs for configuration=== 
6 GPIOs were available for configuration, while IP Speaker has one GPIO. Now only one GPIO is shown for configuration.

=== MTN-4655 GPIO is now shown as Relay if set as Output=== 
If GPIO was set as Output under I/O tab, it was not shown as Relay under Relays/Outputs tab. This is now fixed.

=== MTN-4566 Removed Partial Reboot Option=== 
The Partial Reboot option has been removed from the device web recovery page.

=== MTN-4474 Multicast paging no longer gets interrupted or stopped on unrelated config changes=== 
Audio will no longer be interrupted or stopped when unrelated configuration change, such as adjusting the volume, are made.

=== DS-1572 Audio Setup Real-Time challenges=== 
Observed on Connect case call to queue four duplicated SDP in short time interval causing up two 4 start and stop on one setup. This optimization deprecates memory intensive AEC context save and restore by keeping state in code-object between calls. Also added state handling on new Audio Session separating network audio and audio engine initialize in different steps.

=== DS-1571 Duplicated SDPs from SIP-Invite/Re-Invite causes multiple audio start/stop with possible side effects=== 
Observed on Connect case call to queue four duplicated SDP in short time interval causing up two 4 start and stop on one setup. This optimization check for duplicated SDPs in Re-Invites and do nothing if repeated with same parameters.

=== DS-1502 Multicast paging could stop working under some rare conditions=== 
Multicast paging would stop working under some rare conditions, this is now fixed.

<br>

== Security Updates ==
=== MTN-4795 Fixed multiple vulnerabilities ===
* Fixed multiple vulnerabilities registered under CVE-2025-64126, CVE-2025-64127, CVE-2025-64128, CVE-2025-64129, and CVE-2025-64130. These vulnerabilities were associated with legacy web interface components. The affected functionality has been removed or redesigned to prevent misuse.

* '''Action''': Upgrade to version 9.3.3.0 (8.2.3.4 for TCIV legacy hardware) or later to ensure the latest security enhancements are applied.







[[Category: Release notes]]