View source for AUDIO PATH SETUP

{{A}}
{| border="1"
|-
!style="background:#ffdead;" width="90pt" colspan="2"|AUDIO_PATH_SETUP
!style="background:#ffdead;" width="100pt"|0x8001
!style="background:#ffdead;" width="30pt"|32769	
!style="background:#ffdead;" |AMC 06.00
|-
|colspan="5"|[[AlphaNet]]: Set up audio path between a source node and a destination node (possibly via transit nodes). <br />Audio path is needed for a number of exchange features.  To speed up things, the feature setup message is included as “payload” of this message.  
|-
|align=center|1||[[UINT1]]||colspan="3"|Channel number. <br />0 = request for channel.
|-
|align=center|2||[[UINT1]]||colspan="3"|Priority<br />0x00 ... 0x0F
|-
|align=center|3||[[UINT1]]||colspan="3"|Starting node of audio path.
|-
|align=center|4||[[UINT1]]||colspan="3"|Ending node of audio path.
|-
|align=center|5||[[UINT1]]||colspan="3"|Backward local reference for next node
|-
|align=center|6||[[UINT1]]||colspan="3"|Channel type. <br />1 = Full duplex audio channel <br />2 = IP full duplex audio channel. (field 7,8,9 added)
|-
|align=center|7||[[UINT4]]||colspan="3"|Prev node Audio [[RTP]] IP address for next node (AMC 10.00)
|-
|align=center|8||[[UINT2]]||colspan="3"|Prev node Audio [[RTP ]] port number for next node (AMC 10.00)
|-
|align=center|9||[[BITMAP]][1..32]||colspan="3"|Start node AudioCodecs supported. (AMC 10.00)<br /> See [[AUDIO CODEC]]
|-
|align=center|10||PAYLOAD||colspan="3"|End-to-end message.  See below
|-
|colspan="2"|Response:	
|colspan="3"|[[AUDIO_LINK_OK]] <br />[[AUDIO_LINK_NOT_AVAILABLE]]
|-
|colspan="5"|&nbsp;<br />'''PAYLOAD MESSAGE attached to AUDIO PATH SETUP and related messages:'''<br />&nbsp;
|-
|align=center|1||[[UINT1]]||colspan="3"|Protocol version:<br />0 = [[AlphaCom]] basic functions 
|-
|align=center|2||[[UINT1]]||colspan="3"|Remote function:<br />1 = Remote proxy station, digits will be dialed later. <br />3 = Ordinary call identified by Bnumber parameter. <br />5 = Call to waiting station identified by Bnumber parameter, used for answer calls. <br />Support for remote functions 3 and 5 is acknowledged in [[AUDIO_PATH_OK]] with Bprotocol version set to 1 or higher. 
|-
|align=center|3||[[UINT1]]||colspan="3"|Exchange type:<br />1 = AC <br />2 = TL (When TL: Duplex is in start exchange)
|-
|align=center|4||[[UINT1]]||colspan="3"|Station type:<br />0 = Master <br />1 = Sub <br />2 = PNCI <br />3 = CRM3/4 <br />4 = Interguard <br />5 = DualDisplay <br />6 = Custom <br />7 = SIP
|-
|align=center|5||[[UINT1]]||colspan="3"|Display type <br />0 = No display <br />1 = TL type <br />2 = CRM3/4
|-
|align=center|6||[[UINT1]]||colspan="3"|[[Class of service]]
|-
|align=center|7||[[UINT1]]||colspan="3"|Group call access level
|-
|align=center|8||[[UINT1]]||colspan="3"|Call priority
|-
|align=center|9||[[BITMAP]][1..16]||colspan="3"|Flags describing station and its configuration:<br />bit 1: Handset_off<br />bit 2: Mkey<br />bit 3: Open/private <br />bit 4: Voice help wanted<br />bit 5: Allowed to page absent user<br />bit 6: Name extension available (AMC 08.02)<br />bit 7: Door opening available<br />bit 8: Station duplex control (AMC 08.02)<br />bit 9: Station Recording outgoing flag (AMC 10.60)<br />bit  10-15 not used. bit 1 and 2 always 0 in AMC 06.00
|-
|align=center|10||[[NET_OBJ_REF]]<br />{[[ECL_STATION]]}||colspan="3"|A-station technical reference:  node and physical number<br />&nbsp;
|-
|align=center|11||[[NET_OBJ_REF]]<br />{[[ECL_USER]]}||colspan="3"|A-station human reference:  node and directory number.
|-
|align=center|12||[[TEXT16]]||colspan="3"|Asubscriber text (name) for display.
|-
|align=center|13||[[UINT1]]||colspan="3"|User Defined Properties ([[UDP_group|UDP]]) of Astation.<br />Feature 1 = value 1, feature 8 = value 127, combinations allowed <br> AMC 07.10 
|-
|align=center|14||[[NET_OBJ_REF]]||colspan="3"|B number to be dialed in Bexchange.<br />Only valid with remote functions 3 and 5<br />If not used, this parameter should set to [[INVALID_NRF]] = 0x0F, or left out.  <br> AMC 07.10
|-
|align=center|15||[[UINT2]]||colspan="3"|If call was set up by [[CALL SETUP]] message: Call mode options as specified in a CALL_SETUP message. Optional, rest is omitted if zero   <br> AMC ?? 
|-
|align=center|16||[[UINT1]]||colspan="3"|If call was set up by [[CALL SETUP]] message: [[Node]] of originator of CALL_SETUP.   <br> AMC ?? 
|-
|align=center|17||[[UINT1]]||colspan="3"|If call was set up by [[CALL SETUP]] message: [[Device]] of originator of CALL_SETUP.   <br> AMC ?? 
|-
|align=center|18||[[UINT2]]||colspan="3"|If call was set up by [[CALL SETUP]] message: [[Message reference]] specified in CALL_SETUP.   <br> AMC ?? 
|-
|}


[[AlphaNet_Data_Protocol#AlphaNet|Back to AlphaNet message list]]

[[Category: ACDP messages]]