View source for Play DAK Feature

{| border="1"


== Programming of DAK sequences with single digit dialing and wait states ==


''' Available from AMC 10.50 '''

=== Play DAK programmed from DAK string ===
By using the DAK "T" parameter a 18 digit string can be programmed.

Sequence syntax:
 0-9    Digits
 # *    Signaling available during trunk connection
 w      Pause for 0,5 Second 
 W      Pause for 1 Second 
 

Example DAK string as programmed in AlphaPro: <br\>
[[Image:PlaydakAlphaPro.PNG|600px|AlphaPro Play DAK]]



Description: <br\>
Get line out "01" <br\>
Wait 1 Sec <br\>
Dial Tellog pin code "123#"<br\>
Wait 2 Sec <br\>
Dial Zenitel "40002500". <br\>

=== Timing of play speed ===  
Default digit step time is 200 ms. Configurable from NVRAM:

 85 &000874 .ex_profile.timeouts.play_dak_time = 2 (0x0002) <br\>



===Play DAK by Data Protocol ===
If longer strings are needed the [[Station DAK key as RCI (Event Type)|Station DAK key as RCI]] event trigger can be used for sending the play dak [[PLAY_DAK |$PD]] data protocol message.

===Restriction===
 Maximum 50 simultaneous DAK Play functions can be activated at the same time in one node.


A description of "first" edition of the Play DAK function from 10x43x520 is found here:
[[Play DAK | Play DAK - "Old version" only on 10x43x520]]

[[Category:AlphaCom E Software]]