View source for Increased volume on ringing signal

This article describes how to increase the volume of the private ringing signal, and set it back to normal when the call is answered (or canceled).

It also describes how a customized audio message can be played in the loudspeaker during the ringing sequence.


==Increase volume on ringing signal==
As from firmware version AMC 10.23 the volume to a station can be changed by the data command [[VOL]]. By using the event type [[Private Ringing mode (Event Type)|9 - Private Ringing mode]] in the [[Event Handler]], one can set a higher volume during the ringing, and set it back to a normal level when the call is answered (i.e. when the Private Ringing mode goes off).

In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
------------
{| 
|-
|width="100pt"|'''Event Owner''':
|width="400pt"|Stations w/ UDP, Id: 8 (all stations)
|-
|'''Event type''': || [[Private Ringing mode (Event Type)|09 - Private Ringing mode]]
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || All
|-
|'''Action:''' || $[[VOL]] L[[Event_Handler#List_of_context_parameters|%1.dir]] U[[Event_Handler#List_of_context_parameters|%chg]](6,3)
|-
|}

------------
When a station starts to ring the volume is set to level 6, and when the ringing stops the volume is set to level 3.


==Play a customized audio message during ringing==

The audio file must be [[Audio_Messaging#Upload_customized_wav-files_from_AlphaWeb|uploaded to the AMC-IP as an alarm message]]. A basic or enhanced [[Licenses#Audio_Messaging_License|audio message license]] is required.

In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following event:
------------
{| 
|-
|width="100pt"|'''Event Owner''':
|width="400pt"|Stations w/ UDP, Id: 8 (all stations)
|-
|'''Event type''': || [[Private Ringing mode (Event Type)|09 - Private Ringing mode]]
|-
|'''When change to''': || ON or OFF
|-
|'''When related to''': || All
|-
|'''Action:''' || AMS %1.phy %chg(3,0)
|-
|}

------------
When a station starts to ring the volume is set to level 6, and when the ringing stops the volume is set to level 3.


<br><br>

[[Category:Applications]]