View source for 1-1b. AlphaWeb - Getting started (solution)

[[File:EX1-1b.PNG|left|thumb|600px|System configuration]]
<br style="clear:both;" />
__NOTOC__

===PC Settings===
*Configure your computer to have IP address 169.254.1.1
*Connect the PC to the ethernet port 0 of the AlphaCom using a standard ethernet cable

===Login===
*Use an internet browser like Internet Explorer to access AlphaWeb by typing in the exhcange default IP address: 169.254.1.5
*Default username: '''''admin'''''
*default password: '''''alphaadmin'''''

===Configure Ethernet port 1===
*In AlphaWeb go to ''System Configuration -> Interfaces''
*Set the IP address on eth1 to 10.1.10.1/16 (...<u>/16</u> means Subnet Mask = 255.255.0.0)
*Press ''Validate'', then ''Save & Apply''
[[File:1-1b solution.PNG|500px|thumb|left|AlphaWeb: System Configuration > Interfaces]]
<br style="clear:both;" />

===Configure filters===
*In AlphaWeb go to ''System Configuration > Filters''
*For Eth1, enable the ports for AlphaWeb (http, port 80) and for AlphaPro
*Press ''Save''
*Press ''Apply''
*Press ''Yes''
[[File:1-1b solution2.PNG|500px|thumb|left|AlphaWeb: System Configuration > Filters]]
<br style="clear:both;" />

===Access AlphaWeb via Eth 1 ===
*Configure your computer to have IP address 10.1.10.90
*Connect the PC to the ethernet port 1 of the AlphaCom 
* Access AlphaWeb by typing in the IP address 10.1.10.1 in the address field of the web brwser


<br><br><br><br>

----

===Related articles ===
* [[1-1b. AlphaWeb - Getting started (practice)]]

[[Category: AlphaCom practice]]