View source for Akuvox R29S (Edge)

{{E}}
<br clear=all/>
[[File:Akuvoxr29.png|right|thumb|150px|Akuvox R29 unit]]

This article describes how to set up the '''Akuvox R29S''' device in an '''IC-EDGE System'''. 

== Edge Controller configuration ==
You need to manually add the Akuvox R29S as a 3rd party SIP device to the Edge Controller. [https://wiki.zenitel.com/wiki/Licensing_in_IC-EDGE SIP Client Extension license] is required.

* [[Logging into an IP Station|Log on to the Edge Controller]]
* From the menu '''Edge Controller''' > '''System Configuration''' > '''Directory''', under the '''Manually Added Devices''' section, press the "+" button
* Select '''3rd party SIP''' from the dropdown list
* Modify Number and Name as required (a default Number and Name will be inserted, which you can modify)
* Optionally one can add a '''SIP Password'''. If a password is entered, one have to manually enter the same password in  the '''Password''' field in the Akuvox R29S. The password is used for authentication during the registration process.
* Press '''Save''' to store the new device in the Edge Controller

[[File:Edge_Akuvox.jpg|thumb|left|700px|Adding new SIP device to the Edge System]]
<br clear=all/>

== Configuration of the Akuvox R29S ==

===Network settings===
Akuvox R29S uses DHCP by default, which means that IP address, subnet mask and default gateway will be obtained from DHCP server automatically. 
To find the IP address of the station follow these steps:
# Power up the Akuvox R29S
# Go through the initial setup of selecting language and theme
# Push on the touch screen, and select '''Dial''' or '''Call''', depending on the theme you selected
# Enter the secret code for the settings, by default "9999", and press the Call button
# Enter the password for the Setting menu, by default "3888" and press '''OK'''
# Go to '''Info''' to find the IP address of the station. If the IP address is 0.0.0.0, this means there is no DHCP Server in the network. You need to manually set the IP address, subnet mask and default gateway. To do this go to the '''Network''' menu, disable DHCP, enter the required information and press '''Save'''.
# Open a web browser on your computer, enter the IP address into the address bar and press '''Enter'''.
# Enter the user name (default: '''admin''') and password (default: '''admin''') in the pop-up dialogue box and click '''Login'''
# Select '''Network''' > '''Basic'''  to configure the phone to use '''DHCP''' (obtain an IP address automatically) or '''Static IP address'''.
<br clear=all/>
[[File:R29C_network.jpg|thumb|700px|left|Network settings in the Akuvox R29S]]
<br clear=all/>


=== SIP account settings ===
A SIP account must be configured using the settings from the IC-Edge controller. To set it up go to '''Account''' > '''Basic'''

=====SIP Account=====
* '''Status''': Shows the status of the SIP account
* '''Account''': Select "Account 1" or "Account 2"
* '''Account Active''': Select "Enabled"
* '''Display Label''': To enter the label name of this account, which will show on the account status interface
* '''Display Name''': To enter the display name of this account, which will show on other devices when making calls
* '''Register Name''': Used to register to the Edge Controller. Must match the directory number entered in the Edge Controller
* '''User Name''': This ID is identical to the "Register Name". Must match the directory number entered in the Edge Controller
* '''Password'''(Optionally): If a password is entered, one have to enter the same password in the '''SIP Password''' field of the Edge Controller. The password is used as authentication during the registration process

=====SIP Server 1=====
* '''Server IP''': Enter the IP address of the Edge Controller
* '''Port''': The SIP port used. Normally 5060.
* '''Registration Period''': The registration will expire after registration period, the phone will re-register automatically within registration period.

[[File:R29C_account.jpg|thumb|700px|left|Setting up a SIP account in the Akuvox R29S]]
<br clear=all/>


=== Video from Akuvox R29S ===
The Akuvox R29S will by default send video to a station with video display, like the ITSV-1. If there are issues with the video go to [[#Troubleshooting when no video|troubleshooting]]


=== Door Opening feature ===
The Akuvox R29S has 3 integrated relays. By default, the relays can be activated during a call by pressing "#" for Relay A, digit "2" for Relay B and digit "3" for relay C. After activating a relay, the call will end after 5 seconds. This timer can be modified.
To make changes to the relays settings, log in to Akuvox R29S, go to '''Intercom''' > '''Relay'''.
* Relay ID - ID of the relay
* Trigger Delay(Sec) - To delay the door opening action
* Hold Delay(Sec) - To configure the duration of opened relay. After this time, the relay will be closed again and the call will end. The default value is 5 seconds
* DTMF Option - To select digit of DTMF code, R29S supports maximum 4 digits DTMF code
* DTMF - To configure 1 digit DTMF code
* Multiple DTMF - To configure multiple digits DTMF code
* Relay Status: Low means that COM is connecting to NC, while High means that COM is connecting to NO

[[File:R29C_relay.jpg|thumb|700px|left|Relay settings]]
<br clear=all/>


{{note| For a station to be able to activate the relay on the Akuvox R29S, that station must be added in the Phonebook of the Akuvox R29S. To do this go to '''PhoneBook''' > '''Phonebook''' and add the station in the '''Local Phonebook''' section}}

===Input configuration===
The Akuvox R29S has 3 inputs that can be used to connect buttons or switches that will activate a relay or trigger other events.

To configure what the inputs do, log in to the Akuvox R29S,  go to '''Intercom''' > '''Input'''
* Input Service: To enable or disable input trigger service.
* Trigger Option: To choose open circuit trigger or closed circuit trigger. Low means that connection between Door terminal and GND is closed, while High means the connection is opened.
* Action to execute: To choose which action to execute after triggering.
* Http URL: To configure URL, if HTTP action is chosen.
* Action Delay: To delay the action
* Open relay: To configure relay to open
* Door status: To show the status of input signal.

[[File:R29C_input.jpg|thumb|700px|left|Input settings]]
<br clear=all/>


===Factory reset===
Factory reset can be made from the web interface and from the station menu.

====Factory reset from web interface====
* Go to '''Upgrade''' > '''Basic'''
* Under '''Reset to Factory Setting''' click '''Submit'''
* Confirm the action
* The station will have DHCP enabled after Factory reset. To find out what is the IP address of the station go to [[#Network_settings|Network Settings]]

[[File:R29C_factory.jpg|thumb|700px|left|Factory reset]]
<br clear=all/>

====Factory reset from station menu====
* Press the '''Dial'''/'''Call''' button
* Enter the secret code for the settings, by default "9999", and press the Call button
* Enter the password for the Setting menu, by default "3888" and press '''OK'''
* Navigate to Restore button, press it and then press Confirm
* The station will have DHCP enabled after Factory reset. To find out what is the IP address of the station, go to [[#Network_settings|Network Settings]]

=== Troubleshooting no video ===
The ITSV-1 should show video from a Akuvox R29S station when a call is established, without having to do any configuration. However, if no video is present during a call, check the following:

'''ITSV-1 unit:''' 
* Log in to the ITSV and navigate to '''Account''' > '''Account 1''' > '''Call Settings''', and verify that '''Start Video Automatically''' is enabled. 

'''Akuvox R29S''':
*Codec issue:
** Log in to the Akuvox R29S, and select '''Account''' > '''Advanced''' > '''Account 1'''
** Under the '''Video Code''' section, verify that the checkbox for '''H264''' is checked

[[File:R29C_videocodec.jpg|thumb|700px|left|Video codec settings]]
<br clear=all/>
*Auto Answer Mode
** Log in to the Akuvox R29S, and select '''Phone''' > '''Call Feature'''
** Under '''Others''' in the '''Auto Answer mode''' check if '''Video''' is seleceted from the drop-down list

[[File:R29C_autoanswer.jpg|thumb|700px|left|Auto Answer settings]]
<br clear=all/>

[[Category: IC-EDGE Configuration]]