View source for Avaya Aura CM 7.1 configuration

=Overview=
The configuration and verification operations in this document are performed through the Site Administration tool and via the System Manager web interface for the Avaya section and with the standard web interface for Turbine station configuration (we recommend Firefox or Chrome). 

Except where stated, the parameters in all the procedures are the default settings and are supplied for reference only. For all other information such as provisioning of the trunks, call coverage, extensions, and voicemail, please refer to the documentation in Related Articles.

The procedures fall into the following areas:

*Configure IP Codec Set
*Configure SIP User
*Configure SIP settings on the Turbine station
*Configure Account settings on the Turbine station
*Verification

=Prepare for Installation=
Plan your installation by preparing configuration data you would need to set up Turbine.

{| class="wikitable"
! style="font-weight: bold;" | Parameter
! style="font-weight: bold;" | Value
|-
| Station Name*
| Turbine
|-
| Directory Number (SIP ID)*
| 8279999
|-
| Authentication User Name*
| same as defined in section "''Configure SIP User''"
|-
| Authentication Password*
| same as defined in section "''Configure SIP User''"
|-
| Server Domain (SIP) address*
| devconnect.local
|-
| Backup Domain (SIP) address
| -
|-
| Outbound Proxy (optional for UDP)
| 10.10.16.77
|-
| Outbound Proxy Port (default 5060)
| 5061 for TLS
|-
| Outbound Backup Proxy (optional for UDP)
| -
|-
| Outbound Backup Proxy Port (default 5060)
| -
|-
| Outbound Transport
| UDP/TCP/TLS
|-
| SIP Scheme (default sip)**
| sip/sips
|-
| RTP Encryption**
| only if are using SRTP
|-
| SRTP Crypto Type**
| only for SRTP
|-
| TLS Private Key**
| only for TLS
|}

 *=required
 **=required for TLS and SRTP crypto type

=Avaya Aura Communication Manager Configuration=
==Configure IP Codec Set==
The IP Codec set must be configured with the codecs for use by IP endpoints. 

Enter the command '''change ip-codec-set x''' where x is the relevant codec set and set the '''Audio Codec''' to be used on '''Page 1'''. 

In the example below, codecs '''G.711MU''' and '''G.711A''' are configured. Media Encryption ('''1-srtp-aescm128-hmac80''') was set for this test with '''Encrypted SRTP: best-effort'''.
<br>
[[File:sip_aura_1.jpg]]
<br>
{{Note|Turbine stations supports the following codecs: '''G.711a, G.711u, G.722 and G.729'''}}
<br style="clear:both;" />
==Configure SIP User==
A SIP user must be added for each Turbine endpoint required. Navigate to the System Manager web interface, in this case https://<IP Address>/SMGR and log in with the relvant credentials.
<br>
[[File:sip_aura_2.jpg]]
<br>
From the Dashboard, select '''Users''' > '''User Management''' > '''Manage Users''' > '''New'''
<br>
[[File:sip_aura_3.jpg]]
<br>
On the '''Identity''' tab:
*Enter an identifying '''Last Name''' and '''First Name'''
*Enter an appropriate '''Login Name'''
*Set '''User Type''' to '''Basic''' 
*Set a password in the '''Password''' and '''Confirm Password''' fields
<br>
[[File:Sip_aura_4.jpg]]
<br>
On the '''Communication Profile''' tab:
*Enter and confirm a '''Communication Profile Password''' (used when logging into the SIP endpoint)
*Under '''Communication Address''' click '''New'''
*Select '''Avaya SIP''' from the '''Type''' dropdown box
*Enter the '''Fully Qualified Address''' of the new SIP user
*Click '''Add''' when done
<br>
[[File:sip_aura_5.jpg]]
<br>
Continue to scroll down on the same page and enter the '''Primary Session Manager''', '''Origination Application Sequence''', '''Termination Application Sequence''' and '''Home Location''' relevant to the implementation.
<br>
[[File:sip_aura_6.jpg]]
<br>
*Scroll down the page to the '''CM Endpoint Profile''' section
*Select the Communication Manager system from the '''System''' dropdown box
*Select '''Endpoint''' as the '''Profile Type'''
*Enter the '''Extension''' number you wish to use
*Select '''9620SIP_DEFAULT_CM_7_0''' as the '''Template''' 
*Set '''IP''' as the '''Port'''
*Click '''Commit''' (not shown) when done

Repeat this procedure for every SIP extension required.
<br>
[[File:Sip aura 7.jpg]]
<br>

=Configure Turbine Station=
The following steps are for the configuration of the Turbine station using its web interface:

*Launch Web Interface
*Add Root Certificate
*Administer SIP Settings
*Configure Direct Access Key

==Launch Web Interface==
To access the Turbine station web interface:

*Enter '''http://<ipaddress>''' in an Internet browser where '''<ipaddress>''' is the IP address of the Turbine station
*Log in with the appropriate credentials (default username: admin, password: alphaadmin)
The '''IP-StationWeb''' screen displays the '''Station Information.'''
<br>
[[File:sip_aura_8.jpg]]
<br>

==Administer Main Settings==
Under the Station Main tab:

*Select '''Main Settings'''
*Under '''Model''' select :
** For TCIS stations select:
*** '''Kit (TKIS-2SIP),'''
*** '''Normal (TCIS-1SIP, TCIS-2SIP, TCIS-3SIP),'''
*** '''OLED Labels (TCIS-4SIP, TCIS-5SIP),'''
*** '''Scrolling Station (TCIS-6SIP),'''
** For TCIV stations select:
*** '''Kit (TKIS-2SIP),'''
*** '''Video Normal (TCIV-2SIP, TCIV-3SIP),'''
*** '''Video Scrolling Station''' '''(TCIV-6SIP),'''
** For TMIS stations select:
*** '''TMIS1-SIP'''
*Click '''Save''' when done
*When a screen appears (not shown) to confirm the setting, click '''Apply'''

The Turbine station will now reboot.
<br>
[[File:Turbine web main.jpg]]
<br>

==Administer SIP Settings==
Under the '''SIP Configuration''' tab:

*Select '''SIP Settings''' to configure the parameters in the '''Account Settings''' section
*Set the Turbine stations support '''UDP''', '''TCP''' and '''TLS''' configuration options
*For '''TCP''' and '''TLS''' options, it is necessary to set '''Outbound Proxy''' to have the same value as '''Server Domain'''
<br>
[[File:Account settings sip.jpg]]
<br>
===UDP Outbound Transport===
*'''Display Name:'''                           Enter the desired name.
*'''Directory Number (SIP ID):'''      Enter a user extension administered from section "''Configure SIP User''".
*'''Server Domain (SIP):'''                Enter the Domain of Session Manager.
*'''Authentication User Name:'''     Enter a user extension administered from section "''Configure SIP User''".
*'''Authentication Password:'''       Enter the '''Communication Profile Password''' from section "''Configure SIP User''".
*'''Outbound Proxy (mandatory for TCP and TLS, optional for UDP):'''    Enter the IP address of Session Manager and '''5060''' as the '''Port''' for UDP/TCP
<br>
[[File:Turbine sip udp.jpg]]
<br>

===TCP Outbound Transport===
*'''Display Name:'''                           Enter the desired name.
*'''Directory Number (SIP ID):'''      Enter a user extension administered from section "''Configure SIP User''".
*'''Server Domain (SIP):'''               Enter the Domain of Session Manager.
*'''Authentication User Name:'''     Enter a user extension administered from section "''Configure SIP User''".
*'''Authentication Password:'''       Enter the '''Communication Profile Password''' from section "''Configure SIP User''".
*'''Outbound Proxy (mandatory):''' Enter the IP address of Session Manager and '''5060''' as the '''Port''' for TCP
<br>
[[File:Turbine sip tcp.jpg]]

===Secure SIP Configuration with Secure RTP===
*'''Display Name:'''                           Enter the desired name.
*'''Directory Number (SIP ID):'''      Enter a user extension administered from section "''Configure SIP User''"
*'''Server Domain (SIP):'''                Enter the Domain of Session Manager.
*'''Authentication User Name:'''     Enter a user extension administered from section "''Configure SIP User''"
*'''Authentication Password:'''       Enter the '''Communication Profile Password''' from section "''Configure SIP User''"
*'''Outbound Proxy (mandatory):''' Enter the IP address of Session Manager and '''5061''' as the '''Port''' for TLS
*'''SIP Scheme:''' Select sips from the dropdown
*'''RTP Encryption:''' Select srtp_encryption from the dropdown
*'''SRTP Crypto Type:''' Select from the dropdown as shown
*'''TLS Private Key:''' Select from the dropdown as shown

{{Note|Avaya servers may need to enable the option for '''Use Unencrypted SRTCP'''}}
<br style="clear:both;" />

<br>
[[File:Turbine_sip_tls_srtp_sips.jpg]]
<br>

== Add certificate on Turbine station == 
Using SIP TLS requires you to upload a certificate to be able to do encrypted authentication and communication. 
 
This step must be done before the station is able to register to the PBX. 
*Select '''SIP Configuration''' tab and from the left hand menu 
*select '''Certificates'''. 
The Turbine certificates are listed. 
*Click on '''Choose file''' and browse to the location of the root certificate .pem file. 
*When selected click on the '''Upload''' button

The root certificate is uploaded and is shown in the list (default.pem).
<br><br>
[[File:upload_cert.jpg]]
*Reboot Turbine station ( '''Station Administration''' → '''Reboot''' → '''Reboot''' )
<br>
{{Note|Uploading a certificate is only needed when using SIP TLS}}
<br style="clear:both;" />

== Configure Direct Access Keys ==
Under the '''SIP Configuration''' tab:

*Select '''Direct Access Key Settings''' > DAK 1 to configure it
*In the '''Idle''' field select '''Call To''' from the dropdown and enter the extension number to be called when the '''DAK 1''' key is pressed
*In the '''Call''' field select '''Answer/End Call''' and '''On Key Press'''
<br>
[[File:Dak setting sip.jpg]]

=Backup Domain Configuration=
This section provides configuration procedures for configuring redundacy, backup, and server for the Turbine station.

Select '''SIP Configuration''' > '''SIP Settings''' to configure the following in the '''Account Setting'''s section

All configuration is the same as in section 4.3 with additional fields for configuration Backup and Backup 2 servers:



'''Backup Domain (SIP)''':                   This is the secondary (or fallback) domain. If the station loses connection to the primary SIP domain, it will switch over to the secondary one. This can be either an IP address in regular dot notation or hostname.

'''Backup Domain 2 (SIP)''':                This is the tertiary SIP domain used as backup in case the primary and secondary domains fail. This can be either an IP address in regular dot notation or hostname.

'''Outbound Backup Proxy (mandatory for TCP and TLS, optional for UDP transport protocol)''': Enter the IP address of Session Manager and '''5060 (5061)''' as the '''Port''' for UDP/TCP (TLS)

'''Outbound Backup Proxy 2 (mandatory for TCP and TLS, optional for UDP transport protocol)''': Enter the IP address of Session Manager and '''5060 (5061)''' as the '''Port''' for UDP/TCP (TLS)



Select Registration Method from the dropdown:
*'''Parallel''' 
**In Parallel mode the IP station will try to be registered to all configured SIP servers at the same time. The station will use the primary SIP server for outgoing calls if available, otherwise it will use the next available backup server. In this mode, the station can receive calls from multiple SIP servers at the same time. This mode is not recommended in a Cisco Unified CallManager cluster with multiple publishers and subscribers.
*'''Serial''' 
**Serial registration means that the station will always register to the next available SIP server. The station starts by registering to the primary SIP server, then if the station loses contact with the primary SIP server it will register to the backup server. If the station loses contact with the backup server, then it will register to the secondary backup server. If the station loses contact with the secondary backup server, it will register to the primary SIP server.
*'''Top-Down'''
**Top-Down registration means that the station will try to be registered to the primary SIP server, but periodically poll the backup servers to check that they are up without registering. If the primary SIP server shuts down, then the station will register to the next backup server that is up. If the primary SIP server starts up, the station will unregister at the backup server and switch back to the primary server.
*'''Cisco''' 
**Cisco registration is the same as Top-Down for the primary and backup servers, while the secondary backup server will register to its configured server in parallell.

<br>
[[File:Backup_ipo.jpg]]

=Verification Steps=
This section provides the tests that can be performed to verify the correct configuration of Session Manager and the Turbine station.

==Verify Avaya Aura® Session SIP Endpoint Registration==
In the System Manager web interface:

*Select '''Session Manager''' > '''System Status''' > '''User Registrations.'''
*Verify that Turbine station endpoints are successfully registered as shown below.
<br>
[[File:sip_aura_15.jpg]]
<br>

==Verify Turbine Station SIP Registration==
In the Turbine station web interface:

*Select '''Station Main''' > '''Station Information'''
*Verify that the status shows '''Registered''' under '''Server Domain (SIP)'''

Place a call to another endpoint to verify basic call operation.
<br>
[[File:Sip aura 8.jpg]]
<br>

==Verify Successful Calls==
Place a call to and from the Turbine station endpoint. Verify that 2-way audio can be heard and validate that the call terminates successfully.

=Related Articles=
This section references the Avaya and Zenitel product documentation that are relevant to these Application Notes.

 

The following Avaya product documentation can be found at http://support.avaya.com.

[1]   Administering Avaya Aura® Session Manager Release 7.1.1, August 2015

[2]   Administering Avaya Aura® Communication Manager, Document ID 03-300509

[3]   Avaya Aura® Communication Manager Feature Description and Implementation, Document ID 555-245-205

[4]   Administering Avaya Aura® System Manager 7.1.1, October 2017

 

The Zenitel Turbine documentation can be found at http://www.zenitel.com.
[[Category: SIP intercom - iPBX integrations]]
[[Category: SIP intercom - Configuration]]