View source for CALL SETUP

{{AI}}
{| border="1"
|-
!style="background:#ffdead;" width="90pt" colspan="2"|CALL_SETUP
!style="background:#ffdead;" width="100pt"|0x0008
!style="background:#ffdead;" width="30pt"|8	
!style="background:#ffdead;" |AMC 08.20
|-
|colspan="3"|'''$CALL L101 L102''' <br> '''$CALL L101 L102 W32''' <BR> '''$CALL L101 L102 W64''' <BR> '''$CALL L101 L102 W0 0 1'''
|colspan="2" |''Let 101 call 102'' <BR> ''Let 101 call, ignore if 102 forwards'' <br> ''Let 101 call 102, force both 101 and 102'' <br>''Let 101 call 102, force private ringing
|-
|colspan="5"|$CALL_SETUP sets up a conversation like dialing from a station. Default behavior:
* A station is disconnected if busy
* Call can result in Private ringing, Absent, Busy or Transfer like a ordinary call
* The A station's call priority in NVRAM is used.
* No acknowledge messages are returned
$[[CONN_REQUEST]]/$CONN is retained for compatibility only, CALL_SETUP is the preferred message now.
|-
|align=center|1||[[NET_OBJ_REF]]<br />{[[ECL_STATION]], <br> [[ECL_USER]]}||colspan="3"|A - user or station.
|-
|align=center|2||[[NET_OBJ_REF]] <br />{[[ECL_STATION]], <br> [[ECL_USER]], [[ECL_O_DUPL_CONF]]}||colspan="3"|B - user or station or [[Duplex_Conference]]
|-
|align=center|3||[[UINT2]]<br>(optional)||colspan="3"|Call mode options  (default zero)<br />Call mode options can be the sum of the following:<BR\>  
1: Return [[CONN_REFERENCE]], [[STATION_DOWN]] or [[STATION_BUSY]]. Send [[DISCONNECTED]] at disconnect (CSF_RETURN_ACK)<br>
2: Require [[CONN_REF_ACK]] and [[DISCONNECTED_ACK]] (CSF_3WAY_ACK)<br>
4: Reserved<br>
8: This is a transfer of a [[Billing|billed]] call. Param#6 then carries the nodenumber of the billing node <br>
16: Do not disconnect A station if busy (CSF_NOT_FORCE_A) <br>
32: Do not follow call forwarding (CSF_NO_FORWARD) <br>      
64: Used internally for transfer call, answer group call (CSF_TRANSFER_CALL)   Forces both A and B stations. <br> 
128: Force call in Open Duplex mode (CSF_OPEN_DUPLEX) (AMC 09.03) <br>
256: Start a silence call to an IP station. No LED or loudspeaker turned on the B party. (AMC 11.02.03.01)<br>
512: Force Fixed Open Duplex mode (M key an Hook does not affect the Open Duplex conversation) (AMC 11.02.03.02)
|-
|align=center|4||[[UINT1]]<br>(optional)||colspan="3"|Allocation priority of A station. Zero or omitted means that the NVRAM priority of A station is used,[[Users & Stations (AlphaPro)]]. Priority 4 gives [[Busy override]] of A station. Priority 1,2,3 gives normal allocation. 
|-
|align=center|5||[[UINT1]]<br />(optional)||colspan="3"| [[Call priority]] towards B station. Value 1 - 4. Value zero or omitted means that the NVRAM priority of A station is used, [[Users & Stations (AlphaPro)]]. 
|-
|align=center|6||[[NET_OBJ_REF]]<br />{[[ECL_STATION]]}<br />(optional)||colspan="3"|B Station if User B is not at own station.
|-
|colspan="2"|Response||colspan="3"|[[CONN_REFERENCE]], [[STATION_DOWN]] or [[STATION_BUSY]], or none
|}

'''''See also:'''' [[$CALL command used in AlphaNet (Event Handler)]]
<br/>
<br/>

[[Category: ACDP messages]]
[[Category: DP Commands]]


[[AlphaNet_Data_Protocol#Station_Connect_Operations|Back to AlphaNet message list]]