View source for CCTV control by relays (RCO) when using Call Request

{{A}}
==Situation==
[[Image:CCTV RCO controlled.jpg|thumb|350px|CCTV switch controlled by relays from AlphaCom]]
When a master station is receiving [[Call Request]]s from a substation, a relay can be activated to control a CCTV switch. Each substation can have a dedicated relay output for this purpose. When scrolling the queue, the relay associated to the selected station is activated. In this way the picture on the monitor will follow the queue navigation on the master station. 

When answering the call request the relay remains active during the conversation. Any new call requests received during conversation do not influence on the active relay. When the conversation is cancelled, and there still are calls in queue, the relay associated to the first station in queue will be activated.

==Solution==
The master station should use the [[Mail Queue Operation|763x codes]] for queue navigation. These directory numbers should be assigned to [[DAK]] keys. A number of station types can be used for call queuing. The station should be prepared for call queue operation, how to do this depends on the station type used:
* [[CRM|CRM V station]] 
* [[TouchLine station used for Call Queuing]]
* [[Dual_Display_Station_-_1007007000#DualDisplay_station_used_for_Call_Queuing|DualDisplay station used for Call Queuing]]
* [[Control Room Master IV|CRM IV station]]

Include all substations with cameras in [[UDP group]] 2.

The [[Event Handler]] is used to control the [[RCO]]'s which operate the relays. In the examples below the logical address of the RCO is equal to the [[physical number]] of the substation. E.g. if station on physical number 5 is calling, RCO #5 will be operated.

A [[UDD]] is used to store the conversation status of the master station. 0 = no conversation, 1 = conversation. The index of the UDD is equal to the physical number of the master station. The UDD is checked when call requests are received or deleted. If there is a conversation active there should be no RCO operations. 


In [[AlphaPro]], go to [[Exchange_%26_System_%28AlphaPro%29#Events|Exchange and System -> Events]], press Insert and create the following events:
------------
'''Event 1''' - When a conversation is made from the master station to the substation, set the conversation status in the UDD, and activate the RCO.
[[File:Application_A201.png|500px|left|thumb|]]
<br style="clear:both;" />
{{Code2|
 [[wudd|WUDD %1.phy 1]]
 [[RCO - Set Remote Control Output|RCO %2.phy ON]]
}}

---------------
'''Event 2''' - When the conversation between the master and substation cancels, reset the conversation status (UDD), switch off the RCO, and activate the MAILQ_NAVIG command. This command will step to the first in the queue, and re-trigger the '23 - New Current Mail' event.
[[File:Application_A202.png|500px|left|thumb|]]
<br style="clear:both;" />
{{Code2|
 [[wudd|WUDD %1.phy 0]]
 [[RCO - Set Remote Control Output|RCO %2.phy OFF]]
 [[MAILQ NAVIG|$MAILQ_NAVIG L%1.dir 2]]
}}

------------------

'''Event 3''' - When receiving a Call Request or scrolling the queue, and the master station is not in conversation, activate the RCO associated to the selected substation.
[[File:Application_A203.png|500px|left|thumb|]]
<br style="clear:both;" />
{{Code2|
 [[IF/ENDIF|IF %udd(%1.phy)]]
 [[STOP]]
 [[IF/ENDIF|ENDIF]]
 [[RCO - Set Remote Control Output|RCO %2.phy ON]]
}}

------------------

'''Event 4''' - When a queue entry is deleted or scrolled away from, and the master station is not in conversation, switch off the RCO:
[[File:Application_A204.png|500px|left|thumb|]]
<br style="clear:both;" />
{{Code2|
 [[IF/ENDIF|IF %udd(%1.phy)]]
 [[STOP]]
 [[IF/ENDIF|ENDIF]]
 [[RCO - Set Remote Control Output|RCO %2.phy OFF]]
}}

------------------


[[Category: CCTV]]
[[Category: Video]]
[[Category: AlphaCom Applications]]
[[Category:Applications using Event Handler]]