View source for Call and Function Buttons (Zenitel Connect Pro)

{{C}}
==Introduction==
'''Call''' and '''Function''' buttons are specific to Zenitel devices. A device can have a single button, for instance the call button on a [[TCIS-3]], or multiple function buttons, for instance 100 buttons on an [[IP Flush Master -V2|IP Flush Master]] with two [[IP Flush Master DAK-48 Module|DAK48]] expansion modules.
Function buttons are configured in the Zenitel Connect Pro web interface. The information is then pushed to the individual devices. Functionality of the buttons are device state dependent, with the following states:
* Idle
* Receiving an incoming call/In a call

==Configuring the Call and Function buttons==
From the [[Homepage (Zenitel Connect Pro)|homepage of Zenitel Connect Pro]] Navigate to '''Devices and Connections''' -> '''Configuration'''
* Select a single or multiple devices where the Call and Function buttons are to be configured
* Click on the icon labeled '''Buttons''' [[File:ZC_ButtonsIcon.PNG|25px]]
The number of buttons that will be listed depends on the device type that was selected, when multiple devices are selected, only the buttons which are common to all selected devices are enabled and visible for editing. <br>
Each button has 2 fields that can be configured:

'''Dial String''' - enter the dial string which will be dialed when the button is pressed on the device when it is in idle; when no dial string is entered, nothing will happen when the button is pressed

'''Functions In Call State''' - select action when the button is pressed while the device is in a call or receiving a call:
* '''Answer/End Call''' - answer the call when the device is receiving a call, or cancel an ongoing call
* '''Do nothing'''
* '''End Call''' - cancel an ongoing call
* '''Answer Call''' - answer the call when the device is receiving a call
* '''Push to Talk''' - Press button to speak, release to listen

'''Functions Activation In In-Call State''' 

Click '''Save'''

<table style="max-width:80%; border-style: double; border-color: #c7c7c7;">
<tr style="rowspan:2;">
<td style="display: block; vertical-align: bottom;">[[Image:ZCP CallButtons2.PNG|900px]]</td>
</tr>
<tr>
<td style='background-color:#efefef;'>Example of Call Button configuration</td>
</tr>
</table>
 
[[Category: Zenitel Connect Pro]]
[[Category: Zenitel Connect Pro Device Configuration]]