View source for Door Station call timeout

{{AI}}
This application sets a timer on a call request from a specific station or group. Useful to prevent a door station to be left ringing if the receiver is unattended, i.e. after hours.

Go to Exhcange&System from the top menu in [[AlphaPro]]:
[[File:AlphaPro Exchange and System icon.png|thumb|left|500px]]
<br style="clear:both;" />

From the Exchange&System window choose the Events button:
[[File:Exchange System Events.png|thumb|left|500px]]
<br style="clear:both;" />

In the '''Event Actions''' window click the ''Insert'' button and create an event like this:
[[File:Application3a.png|thumb|left|500px]]
<br style="clear:both;" />

{{Code2|
 $[[SET TIMER|ST]] L%1.dir w300 L%2.dir
}}

The timer portion of the action command is set at w300, which is 300 x 100 milliseconds (30 seconds).  This can be adjusted as needed.

Another event is needed to cancel the call and the call request when the timer expires.  Click the '''Insert''' button again to create this event:
[[File:Application3b.png|thumb|left|500px]]
<br style="clear:both;" />

{{Code2|
 $C L%1.dir
 $[[MAILQ_NAVIG]] L%2.dir 0
}}


Last, if someone answers the Call Request this event will cancel the timer that was started:

[[File:Application3c.png|thumb|left|500px]]
<br style="clear:both;" />

{{Code2|
 $ST L%1.dir w0
}}

Upload the database and you are ready to test.
{{Note|It might take up to a minute for the new function to activate}}

[[Category: AlphaCom Applications]]
[[Category: ICX-AlphaCom Applications]]